COMMANDO AirNET 10KM, 867Mbps, 5GHz, 802.11ac, 2x16dBi High Gain Ant, 25dBm, 1GE, Wireless Bridge
COMMANDO AirNET 10KM, 867Mbps, 5GHz, 802.11ac, 2x16dBi High Gain Ant, 25dBm, 1GE, Wireless Bridge
COMMANDO AirNET Wireless Bridge Series, 5GHz, 802.11ac, 900Mbps, 2 MIMO High Gain 16dBi Internal Directional Antennas, 2T2R, Wireless Power 300mW / 24.77dBm, Multi SSID up to 4, Support Beamforming Technology, 16MB Flash, 128M DDR2 RAM, Support 24V Passive PoE
AIR-WB5G-10K-HG is a 900Mbps outdoor wireless Bridge, Build in 18dBi 2 High Gain Directional antenna, 10KM Outdoor Wi-Fi Distance Coverage, effective solution for outdoor Wi-Fi coverage application. With an outdoor waterproof and dustproof enclosure, built in lighting protection IC, support 24V passive PoE, 2T2R 900M MIMO Technology, 900Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.
AIR-WB5G-10K-HG Supports HI-MAX TDMA Technology (use polling technique to solve the hidden node and resource waste problem between the CPE and base station, provide low latency, high throughput in PTP/PTMP application likes IP camera, long range Wi-Fi Transmission), Gateway, Wireless AP, WISP, WDS operation mode for all wireless coverage.
900Mbps High Data Rate, High Performance<AIR-WB5G-10K-HG supports Wireless AP, Gateway, and Wireless Bridge, super WDS operation mode, to suit for variety application environment. LED display, easy to setup IP address, signal strength, Channel and WDS connection by Function/Selection switch together with LED display, no need to access into GUI, avoid the complex setup program, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
Time-division multiple accessTime-division Multiple Access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots The users transmit in rapid succession, one after the other, each using its own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity
Power over Ethernet (PoE)IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, 24V passive PoE Integrated, Plug and Play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Hardware | |
---|---|
Wireless | 802.11ac/a/n, 5GHz, 900Mbps, MIMO Technology |
Interface | 1 * 10/100/1000Mbps WAN/LAN Port 1*Reset Button for restore factory default settings 1*WDS Switch button to do PTP/PTMP connection |
Antenna | 16dBi High Gain Directional Antennas |
Power consumption | 24V PoE Power |
Size | 315mm*145mm*80mm |
Transmission Data Rate | 900Mbps |
Software Features | |
Communication Standard | IEEE 802.11ac |
Communication Standard Wireless Setting | IEEE 802.11n IEEE 802.11a Intelligent Channel Analysis |
Wireless Setting Wireless Security | Distance Controll 802.1x ACK Time Output Virtual SSID up to 4 BSSID WEP Encryption-64/128/152 bit |
Wireless Security System Setting | WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP) High SSID Web-based configuration (HTTP/Telnet) |
Firmware Upgrade | Upgrade firmware via web browser or TFTP |
Administration Management | Admin User name/Password can be configured |
System Monitoring | Device and Networking status statistic |
Log | Support local log, host log, log file exporting |
Reset | Reset to factory defaults |
Backup | Backup device configuration, then restore this configuration if need |