AIR-AP1300 is Dual Radio 2.4 GHz + 5 GHz 802.11ac High Performance PoE Ceiling Wireless Access Point, Wave 2.0, MU-MIMO 11ac, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Work on both 2.4GHz (400Mbps) + 5GHz (900Mbps),Max data rate can be 1300Mbps, Support Wireless AP, Gateway, Wi-Fi Repeater to meet with different installation requirement, Work with WLAN Controller, Centralized Configuration and Management, easy to achieve Wi-Fi Coverage and Maintenance, AIR-AP1300 Can Access into Cloud Server to do remote monitor and Captive Portal Authentication for more Business value, best choice for Enterprise Wi-Fi Application, Access more end Users, supply more stable and faster Wi-Fi access in client density environments such as hotel, meeting room, KTV, shopping mall.
- Dual Radio 2.4 GHz + 5 GHz 802.11ac, 1300Mbps Data Rate, Comply with IEEE 802.11ac/b/g/n,
- Wave 2.0, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Stronger Signal Strength for More Wireless coverage, More User and More Stable
- Multi SSID up to 12 (4 SSID in 2.4GHz, 8 SSID in 5GHz), Support SSID Broadcasting
- 1*10/100/1000Mbps WAN PoE Port, 1*10/100/1000Mbps LAN Port.
- Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode
- With Build in Firewall, IP Filter, URL Filter and MAC Filter
- Support DDNS, VPN pass through, Port forwarding and DMZ host
- Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security
- Support Active IEEE 802.3at 48V PoE Standard
- 32M Flash, 512M DDR3 RAM
- Comply with IEEE 802.3az Standard, RF Power Adjustment and Frequency Analyzer for Better Application in Different Environment
Wave 2 Technology
With Wave 2.0 Technology, 256QAM Modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams, greatly to improve the communication efficiency.
Power over Ethernet and DC Power available
AIR-AP1300 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. What’s more, it support DC input if need, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
High Power for More Range and Stable Signal
Designed in Power Amplifier on PCB board, the power can be 300mW high power, 3dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply stable Wi-Fi signal for users.
Metal Case, Perfect Heat Dissipation to Extend the Working Life
The bottom shell with metal shell, improved the heat dissipation function, make it work as normal in -30°C to 70°C, extend the device working life.
Access Controller System & Cloud Management System
With Access Control System, plug and play, zero configure the AP’s IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
What’s more, the AC controller with local authentication function, easy to do advertisement and captive portal authentication like Member/WeChat/SMS login.
Besides that, administrator can remote manage through AC controller or cloud server at any place/time, simple and cost save in maintenance.