AIR-WB-1K

COMMANDO CMDAir NET 1KM, 150Mbps, 2.4GHz, 802.11n, 1x8dBi Ant, 20dBm, Wireless Bridge

COMMANDO CMDAir NET Wireless Bridge Series, 2.4GHz, 802.11n, 150Mbps, 8dBi Internal Directional Antennas, 2T2R, Wireless Power 100mW/20dBm, Multi SSID up to 4, Support Beamforming Technology, 8MB Flash, 32MB DDR2 RAM, Support 24V Passive PoE

AIR-WB-1K is a 150Mbps Outdoor Wireless Bridge, Build in 8dBi Antenna, 1KM Outdoor Wi-Fi Distance Coverage. It supports Wireless AP, Gateway, Wireless Bridge & Super WDS Operation Mode, An Effective Solution for Outdoor Wi-Fi Coverage Application. With an Outdoor Waterproof and Dustproof Enclosure, built in Lighting Protection IC, 24V passive PoE, 2T2R MIMO Technology, 150Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.

At-a-Glance

  • 802.11n 2.4GHz 150Mbps Outdoor Wireless Bridge
  • 2 MIMO 8dBi Internal Directional Antennas
  • Wireless Power 100mW/20dBm
  • Support Multi SSID up to 4
  • Supports PTP/PTMP Distance up to 1KM
  • Support WDS PTP/PTMP connection by LED display configuration
  • Supports HI-MAX TDMA Technology (Time-division multiple access)
  • Support 24V POE
  • Waterproof and Dustproof Enclosure
  • Beamforming Technology
  • With Wi-Fi Channel Analysis Tool

Features

AIR-WB-1K Supports HI-MAX TDMA Technology (use polling technique to solve the hidden node and resource waste problem between the CPE and base station, provide low latency, high throughput in PTP/PTMP application likes IP camera, long range Wi-Fi Transmission), Gateway, Wireless AP, WISP, WDS operation mode for all wireless coverage.

150Mbps High Data Rate, High Performance

AIR-WB-1K supports Wireless AP, Gateway, and Wireless Bridge, super WDS operation mode, to suit for variety application environment. LED display, easy to setup IP address, signal strength, Channel and WDS connection by Function/Selection switch together with LED display, no need to access into GUI, avoid the complex setup program, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.

Time-division multiple access

Time-division multiple access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots The users transmit in rapid succession, one after the other, each using its own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity

Power over Ethernet (PoE)

IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, 24V passive PoE Integrated, Plug and Play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

Standard 802.11n, MIMO technology
Memory 32MB DDR2 RAM
Flash 8MB
Interface
1 * 10/100Mbps RJ45 WAN Port
1 * WDS switch button, press it to do WDS PTE/PTMP connection
1 * DC injector, 12V/1A
1 * Reset button, press 15 seconds to revert to default setting
Antenna Build in 8dBi MIMO Panel Antenna
Power consumption 24V PoE, <8W
Size 260mm * 85 mm * 45mm
RF Data
Frequency 2.4GHz: 802.11n
Throughput 150Mbps
Modulation
OFDM = BPSK,QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Country code FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN
Receive Sensitivity & RF Power
RF Power
02.11n HT20: MCS7 23±2DB, MCS0 26±2DB
802.11n HT40: MCS7 22±2DB, MCS0 25±2DB
Receive Sensitivity
802.11n HT20: -70dbm@MCS7, -90dbm@MCS0
802.11n HT40: -66dbm@MCS7, -90dbm@MCS0
802.11ac HT80: -60dbm@MCS9, -86dbm@MCS0
EVM
802.11n: ≤-28 DB
802.11a: ≤-25 DB
Firmware Features
Operation mode Wireless AP, Gateway, WISP, WiFi Repeater, WDS
WAN Type Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID Multiple SSID up to 4
Protocols IPv4
Others
Package Contents
150Mbps Dual Band wireless access point
Ethernet Cable
Quick Installation Guide
Setting Accessory
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Environment
Operating Temperature: -40~55 ℃
Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing;
Storage Humidity: 5%~90% non-condensing
Management Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

Related Products

AIR-AP300

AIR-AP300

COMMANDO CMDAir ONE 300Mbps, 2.4GHz, 802.11n, MIMO, Business Access Point

AIR-AP750

AIR-AP750

COMMANDO CMDAir ONE 750Mbps, 2.4GHz+5GHz 802.11ac, Business Access Point

AIR-AP1200

AIR-AP1200

COMMANDO CMDAir ONE 1200Mbps, 2.4GHz+5GHz 802.11ac, Business Access Point

AIR-AP1300

AIR-AP1300

COMMANDO CMDAir ONE 1300Mbps, 2.4GHz+5GHz 802.11ac, Wave 2.0, MU-MIMO 11ac, Enterprise Access Point

AIR-AP2200

AIR-AP2200

COMMANDO CMDAir ONE 2200Mbps, Tri-Band 2.4GHz+5GHz+5GHz, 802.11ac, Wave 2.0, MU-MIMO 11ac, Enterprise Access Point

Awards

Certificate

Download 'COMMANDO Networks' Mobile App Available on App Store and Google Play

Whether you are browsing the web or on the go, you can easily add content to your queue with our mobile apps. Save time and get more done by working from anywhere.