COMMANDO AirONE 1300Mbps, 2.4GHz+5GHz, 802.11ac, Wave 2.0, MU-MIMO, Enterprise Access Point

Click on image to expanded


COMMANDO AirONE 1300Mbps, 2.4GHz+5GHz, 802.11ac, Wave 2.0, MU-MIMO, Enterprise Access Point


AIR-AP1300 is Dual Radio 2.4 GHz + 5 GHz 802.11ac High Performance PoE Ceiling Wireless Access Point, Wave 2.0, MU-MIMO 11ac, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Work on both 2.4GHz (400Mbps) + 5GHz (900Mbps),Max data rate can be 1300Mbps, Support Wireless AP, Gateway, Wi-Fi Repeater to meet with different installation requirement, Work with WLAN Controller, Centralized Configuration and Management, easy to achieve Wi-Fi Coverage and Maintenance, AIR-AP1300 Can Access into Cloud Server to do remote monitor and Captive Portal Authentication for more Business value, best choice for Enterprise Wi-Fi Application, Access more end Users, supply more stable and faster Wi-Fi access in client density environments such as hotel, meeting room, KTV, shopping mall.

Main Features:

  • Dual Radio 2.4 GHz + 5 GHz 802.11ac, 1300Mbps Data Rate, Comply with IEEE 802.11ac/b/g/n,
  • Wave 2.0, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Stronger Signal Strength for More Wireless coverage, More User and More Stable
  • Multi SSID up to 12 (4 SSID in 2.4GHz, 8 SSID in 5GHz), Support SSID Broadcasting
  • 1*10/100/1000Mbps WAN PoE Port, 1*10/100/1000Mbps LAN Port.
  • Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode
  • With Build in Firewall, IP Filter, URL Filter and MAC Filter
  • Support DDNS, VPN pass through, Port forwarding and DMZ host
  • Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security
  • Support Active IEEE 802.3at 48V PoE Standard
  • 32M Flash, 512M DDR3 RAM
  • Comply with IEEE 802.3az Standard, RF Power Adjustment and Frequency Analyzer for Better Application in Different Environment

Product Features:

Wave 2 Technology

With Wave 2.0 Technology, 256QAM Modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams, greatly to improve the communication efficiency.

Power over Ethernet and DC Power available

AIR-AP1300 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. What’s more, it support DC input if need, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

High Power for More Range and Stable Signal

Designed in Power Amplifier on PCB board, the power can be 300mW high power, 3dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply stable Wi-Fi signal for users.

Metal Case, Perfect Heat Dissipation to Extend the Working Life

The bottom shell with metal shell, improved the heat dissipation function, make it work as normal in -30°C to 70°C, extend the device working life.

Access Controller System & Cloud Management System

With Access Control System, plug and play, zero configure the AP’s IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
What’s more, the AC controller with local authentication function, easy to do advertisement and captive portal authentication like Member/WeChat/SMS login.
Besides that, administrator can remote manage through AC controller or cloud server at any place/time, simple and cost save in maintenance.


Standard802.11ac/b/g/n, MU-MIMO technology
Memory512MB DDR3 RAM
Interface1 * 10/100 /1000Mbps RJ45 WAN Port
1 * 10/100 / 1000Mbps RJ45 LAN Port
1 * Reset button, press 10 seconds to revert to default setting
1*DC Port
AntennaBuild in 3dBi MIMO Antenna
Power consumption48V PoE<30W
Size198mm X 32mm
RF Data
Frequency2.4G:802.11b/g/n: 2.4GHz – 2.484GHz
5GHz:802.11a/n/ac MIMO: 5.150GHz~5.850GHz
ModulationOFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM
2.4G RF Power (IPQ4019)802.11b: 11M 23±2dBm, 1M 25±2dBm
802.11g: 54M 22±2dBm, 6M 24±2dBm
802.11n HT20: MCS7 21±2dBm, MCS0 23±2dBm
802.11n HT40: MCS7 21±2dBm, MCS0 23±2dBm
5G RF Power(IPQ4019)802.11b: 54M 19±2dBm, 6M 21±2dBm
802.11n HT20: MCS7 18±2dBm, MCS0 20±2dBm
802.11n HT40: MCS7 18±2dBm, MCS0 20±2dBm
802.11ac HT80: MCS9 17±2dBm, MCS0 19±2dBm
2.4G Receive Sensitivity802.11b: 11M -85dBm, 1M -94dBm
802.11g: 54M -72dBm, 6M -90dBm
802.11n HT20: MCS7 -70dBm, MCS0 -88dBm
802.11n HT40: MCS7 -68dBm, MCS0 -86dBm
5G Receive Sensitivity802.11b: 54M -72dBm, 6M -90dBm
802.11n HT20: MCS7 -70dBm, MCS0 -88dBm
802.11n HT40: MCS7 -68dBm, MCS0 -86dBm
802.11ac HT80: MCS9 -58dBm, MCS0 -85dBm
EVM2.4G EVM: 802.11b: <=-10 dB; 802.11g: <=-25 dB; 802.11n: <=-28dB
5G EVM: 802.11a: <=-25 dB; 802.11n: <=-28 dB; 802.11ac: <=-32 dB
Max Users128
Firmware Features
Operation modeWireless AP, Gateway, WISP, Wi-Fi Repeater
WAN TypeDynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID12 Multiple SSID (4 SSID for 2.4G, 8 SSID for 5.8G)
FirewallDoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding
Package ContentsCOMMANDO Dual Band 1300Mbps Wireless Access Point
Ethernet Cable
Quick Installation Guide
Setting Accessory
System RequirementsMicrosoft Windows 98SE, NT, 2000, XP, Vista or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
EnvironmentOperating Temperature: -20~55°C
Limit working temperature: -30~70°C
Storage Temperature: -40~70°C
Humidity: 5%~95% non-condensing
ManagementFirmware GUI , Remote Management, WLAN Controller, Cloud Management System

Related Products

No Related Products Found



Business Demands to be Smarter

Save time and get more known and done by using COMMANDO mobile app.
Find prices, product details, manage stock, set your selling prices for your team, do market analysis - see what's selling hot and what's not and a lot more - all on COMMANDO mobile app.
Available on all major app stores. Download Now.

COMMANDO Networks Whatsapp
COMMANDO Networks Telegram