AIR-CPE10K+ is a 900Mbps outdoor wireless CPE/Bridge, Build in 15dBi Omni antenna, 10KM+ Outdoor Wi-Fi Distance Coverage. It supports Wireless AP, Gateway, Wireless Bridge & Super WDS Operation Mode, effective solution for outdoor Wi-Fi coverage application. With an outdoor waterproof and dustproof enclosure, built in lighting protection IC, support 24V passive PoE, 2T2R 900M MIMO Technology, 900Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.
AIR-CPE10K+ Supports HI-MAX TDMA Technology (use polling technique to solve the hidden node and resource waste problem between the CPE and base station, provide low latency, high throughput in PTP/PTMP application likes IP camera, long range Wi-Fi Transmission), Gateway, Wireless AP, WISP, WDS operation mode for all wireless coverage.
900Mbps High Data Rate, High Performance
AIR-CPE10K+ support Wireless AP, Gateway, Wireless Bridge, super WDS operation mode, to suit for variety application environment. LED display, easy to setup IP address, signal strength, Channel and WDS connection by Function/Selection switch together with LED display, no need to access into GUI, avoid the complex setup program, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
Time-division multiple access
Time-division multiple access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots The users transmit in rapid succession, one after the other, each using its own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity
Power over Ethernet (PoE)
IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, 24V passive PoE Integrated, Plug and Play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Multiple Operation Mode for Multiple Application
Support Wireless AP, Gateway, Wireless Bridge & Super WDS to meet with different installation requirements, such as Gateway for home use, Wi-Fi Repeater to extend the exist Wi-Fi signal to more range
|Wireless Technology||802.11ac/a/n standard, 2X2 900Mbps MIMO Technology|
|2*10/100/1000Mbps RJ45 Ports|
|1*Reset Button for restore factory default settings|
|1*DC power Port|
|1*WDS Switch button to do PTP/PTMP connection|
|Antenna||18dBi directional antenna|
|LED Indictor||Power,wifi,WAN,LAN, Signal Strength|
|Power||DC 12V/1A;24V PoE Power|
|Transmission Data rate||900Mbps|
|Working Mode||Gateway/AP/Repeater/WISP/WDS/AP mode|
|Intelligent Channel Analysis|
|Distance Controll 802.1x ACK Time Output|
|Virtual SSID up to 4|
|WEP Encryption-64/128/152 bit|
|WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES)|
|WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP)|
|System Setting||Web-based configuration (HTTP/Telnet)|
|Firmware Upgrade||Upgrade firmware via web browser or TFTP|
|Administration Management||Admin User name/Password can be configured|
|System Monitoring||Device and Networking status statistic|
|Log||Support local log, host log, log file exporting|
|Reset||Reset to factory defaults|
|Backup||Backup device configuration, then restore this configuration if need|
|Working Temperature: -20°C~55°C|
|Storage Temperature: -40°C ~ 70°C|
|Working Humidity 5%~95% RH No condensation|
|Storage Humidity 5%~95% RH No condensation|
Whether you are browsing the web or on the go, you can easily add content to your queue with our mobile apps. Save time and get more done by working from anywhere.