COMMANDO CMDAir ONE 300Mbps, 2.4GHz, 802.11n, MIMO, Business Access Point
AIR-CPEO1K+ is a 300Mbps outdoor wireless CPE/Bridge, Build in 8dBi Omni antenna, 1KM+ Outdoor Wi-Fi Distance Coverage. It supports Wireless AP, Gateway, Wireless Bridge & Super WDS Operation Mode, effective solution for outdoor Wi-Fi coverage application. With an outdoor waterproof and dustproof enclosure, built in lighting protection IC, support 24V passive PoE, 2T2R 300M MIMO Technology, 300Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.
AIR-CPE1K+ Supports HI-MAX TDMA Technology (use polling technique to solve the hidden node and resource waste problem between the CPE and base station, provide low latency, high throughput in PTP/PTMP application likes IP camera, long range Wi-Fi Transmission), Gateway, Wireless AP, WISP, WDS operation mode for all wireless coverage.300Mbps High Data Rate, High Performance
AIR-CPE1K+ support Wireless AP, Gateway, Wireless Bridge, super WDS operation mode, to suit for variety application environment. LED display, easy to setup IP address, signal strength, Channel and WDS connection by Function/Selection switch together with LED display, no need to access into GUI, avoid the complex setup program, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
Time-division multiple access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots The users transmit in rapid succession, one after the other, each using its own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity
IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, 24V passive PoE Integrated, Plug and Play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Support Wireless AP, Gateway, Wireless Bridge & Super WDS to meet with different installation requirements, such as Gateway for home use, Wi-Fi Repeater to extend the exist Wi-Fi signal to more range
|Wireless||802.11N, 2T2R 300M MIMO Technology|
|1 * 10/100Mbps RJ45 WAN Port|
|1 * 10/100Mbps RJ45 LAN Port|
|1 * LED display, show operation mode, channel, signal strength|
|1 * F(Function) switch button for LED display|
|1 * S(Select) button for LED display|
|1 * DC Injector|
|1 * Reset button, press 15 seconds to revert to default setting, press 1 second to finish LED display configuration|
|Antenna||11dBi Panel Antenna, V: 60o L: 33o|
|LED Light||PWR(Power), WAN, LAN, Wi-Fi|
|2.4GHz to 2.484GHz|
|Korea, Japan, ETSI, FCC, Debug|
|OFDM = BPSK,QPSK, 16-QAM, 64-QAM|
|DSSS = DBPSK, DQPSK, CCK|
|EVM||11n: ≤-28 DB
11g: ≤-25 DB
11b: ≤-10 DB
Whether you are browsing the web or on the go, you can easily add content to your queue with our mobile apps. Save time and get more done by working from anywhere.