In Wi-Fi setting you can set the 2.4G/5.8G Wi-Fi setting, MAC ACL, Repeater, Wi-Fi Timer off and Advanced settings.

2G/5G Wi-Fi Settings:
Can set Multi SSID in 2G/5G band along with Basic SSID all other VAP 1, VAP 2, VAP 3 SSID can be set. You can ON/OFF particular SSID with this setting.

Repeater Settings:
Repeater can be turn ON or OFF. Selecting scanning repeater SSID with lock BSSID and password and encryption setting.

MAC ACL Settings:
Can allow and prohibit wireless clients based on MAC address.

Wi-Fi Timer Settings:
Wi-Fi Timer ON/ Off along with setting Time Frame.

Advanced Settings:
In Advanced setting can set Country Region, 2G/5G Mode, Multicast Fast, Maximum wireless clients for AP (Range 1-128), WLAN Partition, Short GI, Coverage Threshold and Transmit Power

Note:
All italic config options are only available in WISP and Gateway mode only.

3.1  2G/5G Wi-Fi Setting

We can set 2.4G/5.8G Wi-Fi with Basic Setting along with Virtual AP setting. You can enable or disable Wi-Fi by

Wi-Fi Status: On mean SSID is available for wireless clients.

Wi-Fi Status: Off mean SSID not available.

Note:
By default Basic Wi-Fi SSID “COMMANDO AIR-AP750 2.4G” and “COMMANDO AIR-AP750 5.8G” is turned ON.

Fig 3.1.1 2G Wi-Fi enable and disable of Basic and VAP 1,2,3 of AirONE AP750

Fig 3.1.2 5G Wi-Fi enable and disable of Basic and VAP 1,2,3 of AirONE AP750

Wi-Fi Analyzer is a handy tool which helps you to select a better channel and mainly to analyze the AP’s signal strength and channel, to make it easier for user to choose the channel with less Wireless Interference.

Fig 3.1.3 2G Wi-Fi Analyzer button of AirONE AP750

Fig 3.1.4 5G Wi-Fi Analyzer button of AirONE AP750

Fig 3.1.5 2G Wi-Fi Analyzer of AirONE AP750

Fig 3.1.6 5G Wi-Fi Analyzer of AirONE AP750

Note:
Red line denote channel used and signal strength available. This AP has very strong signal and coverage than all peer top brand AP.

Fig 3.1.7 Enabling 2G VAP 1 of AirONE AP750

Fig 3.1.8 Enabling 5G VAP 1 of AirONE AP750

Note:
You can change All SSID name, Encryption and Wi-Fi password as per your choice to be used by wireless clients.

Fig 3.1.9 Wireless VAP 1 available for clients

Fig 3.1.10 Enabling 2G Wi-Fi VAP 2 of AirONE AP750

Fig 3.1.11 Wireless VAP 2 named COMMANDO of AirONE AP750

Note: You can have Multi SSID up to 8 configured on AirONE AP750. All SSID will use same channel in 2G and 5G band and channel width as set in Basic SSID but each Virtual Access Point (VAP) can set different name, encryption and password.

3.2 Repeater Settings

Repeater Settings like scan Repeater SSID, Encryption, Password of scan SSID and bandwidth can be set.

Fig 3.2.1 Scan 2G Repeater SSID AirONE AP750

Fig 3.2.2 Scan 5G Repeater SSID AirONE AP750

3.3 MAC ACL Settings

MAC ACL Allow or prohibits the wireless users access into this device based on MAC address. Filters using MAC address of wireless client. If you permit or allow few clients then automatically all other non-allowed client cannot associate with AP. When a client is denied access through a MAC-based filter, the client cannot associate with the AP.

Fig 3.3.1 Default MAC ACL of AirONE AP750

Fig 3.3.2 Add MAC ACL of AirONE AP750

Fig 3.3.3 Select MAC address of AirONE AP750

Fig 3.3.4 Apply MAC ACL for AirONE AP750

Fig 3.3.5 Config Button of MAC ACL for AirONE AP750

3.4 Wi-Fi Timer Settings

Enable Wi-Fi Timer Off to turn off the SSID in the specified time.  It schedules, turning your Wi-Fi OFF at a given time so that wireless client cannot associate with AP.

Recommendation: It is not recommended to make Wi-Fi Timer to be OFF in Wizard as well as in this setting to enjoy Wi-Fi all the time.

Fig 3.4.1 Default Wi-Fi Timer Off for AirONE AP750

How to shutdown Wi-Fi after office time?

Assume office time is from 9:00AM to 10:00PM and you wish to turn off Wi-Fi access but want to keep power ON for other use. Then you have to turn OFF Wi-Fi from 22:00 to 09:00 as shown.

Fig 3.4.2 Wi-Fi Timer Off for AirONE AP750

3.5 Advance Setting

In Advanced setting can set Country Region, 2G/5G Mode, Multicast Fast, Maximum wireless 128 clients for AP (Range 1-64) in 2G and AP (Range 1-64) in 5G, WLAN Partition, Short GI, Coverage Threshold and Transmit Power.

Fig 3.5.1 Default Advanced setting for AirONE AP750

Fig 3.5.2 Selecting Country Region for AirONE AP750

Fig 3.5.3 Selecting 2G Mode for AirONE AP750

Fig 3.5.4 Selecting 2G Mode for AirONE AP750

Fig 3.5.5 Selecting Multicast Fast for AirONE AP750

Fig 3.5.6 Setting Maximum wireless clients in 2G/5G for AirONE AP750

Fig 3.5.7 Selecting WLAN Partition for AirONE AP750

Fig 3.5.8 Selecting Short GI for AirONE AP750

Fig 3.5.9 Setting Coverage Threshold for AirONE AP750

Fig 3.5.10 Setting Tx Power for AirONE AP750

Fig 3.5.11 Setting Preferred 5G, DFS, Terminal Fast Roam for AirONE AP750