3.1 IP Address

This page allows to configure and view very important information about IPv4 & IPv6 address, Subnet Mask & Default Gateway. When we try to use Console, TELNET, SSH, HTTP, HTTPS, SNMP to connect to the Switch, we need to use IP address 192.168.0.1 by default  to access Switch.

 

How to change the Access IP address 192.168.0.1 of Switch?

Following page allows you to edit the IP address, Netmask, Gateway and DNS server of the switch. To configure and view the IP Address menu, navigate to Network >> IP Address and change the IP address as well as gateway (Optional) as per your choice.

 

Note:- 1) If all Switch Access IP (Management IP) in network not changed from default i.e. 192.168.0.1 having more than one E2000 switch in same LAN. Then, It can create confusion for access in network via Console, TELNET, SSH, HTTP, HTTPS, SNMP.

  1. If you are using more than one E2000 Series switches in LAN or Network then it is recommended to change the default IP address from 192.168.0.1 to desired IP address as per user requirement.

 

 

Fig 3.1.1 Default Management IP address showing 192.168.0.1 page

 

 

Fig 3.1.2 Changing Management  IP address page

 

Fig 3.1.3 Verification of Changed Management  IP address page

 

 

 

 

3.2 DNS

The Domain Name System (DNS) translates domain names into IP addresses for the purpose of locating and addressing hosts. As a DNS client, the device resolves domain names to IP addresses through the use of one or more configured DNS servers.

To configure and view Domain Name System (DNS), click Network >> DNS

Fig 3.2.1  DNS configuration page

 

Fig 3.2.2  Add DNS Server page

Fig 3.2.2    DNS Server configuration page

 

3.3 Hosts

 

The Domain Name System, more popular as DNS, is responsible for associating domain names, the user-friendly names of websites, with their corresponding real system names - IP addresses. These IP addresses are vital for bringing the website online and in the DNS system are known as A records. This page shows information about DNS Host Configuration. To configure and view Domain Name System (DNS) Host configuration, click Network >>Hosts

Fig 3.3.1  DNS Host blank configuration page

Fig 3.3.2  Add DNS Host and IP address configuration page

 

Fig 3.3.2  DNS Host configuration page