COMMANDO AirONE Indoor Wireless Access Points Data Sheet

AirONE Wireless

 

Product Overview

COMMANDO AirONE series Indoor AP enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard and comes with single band 2.4GHz, Dual Band 2.4GHz+5GHz and Tri-band 2.4GHz+5GHz+5GHz along with Wave 2.0, MU-MIMO with build in High Gain 5dBi MU-MIMO Antenna, Separate Gigabit 1 WAN with PoE+ input & 1 LAN port.

It is 4 in 1 mode Access Point with Gateway, Repeater, WISP and Wireless AP mode with range up to 91 meters with up to 300mW input Power. It is industrial grade Wall/Ceiling PoE+ Wireless Indoor Access Point. It supports MIMO (Multiple-Input Multiple-Output) and 4 Spatial Steams, greatly to improve the communication efficiency, with combined Concurrent 2.4GHz (400Mbps) + 5GHz (900Mbps) + 5GHz (900Mbps) up to 2200Mbps Wi-Fi speed depending on models, equipped with separate Gigabit WAN & LAN port which enhances the sharing of files, photo, audio, video and gaming experience over wireless network.

It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It supports (IEEE 802.3at) PoE+, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.

 

 
 

Product Highlights

• Supports Wave 2.0 Technology with Multi SSID up to 12.
• Supports IEEE 802.11n 2.4GHz/ 802.11ac 5GHz Wireless which having single, dual,  Triple Radio (2.4GHz+5GHz+5GHz) Supported. Build in 5dBi Antenna with RF Power from 28 to 26dBm
• Support wireless RF power adjustable as per user movements from AP
• Access end users up to 256 max, with concurrent end users up to 200 varies with model.
• Support tag VLAN and VLAN management
• Supports intelligent load balance based on users
• Support seamless roaming and low rate terminal access
• Support inbuilt WIFI channel analysis
• Dual purposes WAN or IEEE 802.3at Port (PoE+) port supporting 1x 10/100/1000Mbps.
• Dedicated LAN ports 1x 10/100/1000Mbps.
• Multiple SSID with Up to 4 SSIDs in single band device , 8 SSID in Dual Band and 12 SSID in Triband.
• MIMO High Gain Omni 2.4G/5G with 5dBi Internal Antenna enabling maximum client density deployments with no interference
• Supports Wi-Fi client distance up to 91 meters depending on surrounding conditions. 
• Dual input for power either PoE+ or DC power inputs.
• Support Open or encryption like WPA/WPA2PSK_TKIPAES
• Multiple Operational Modes like Gateway Mode, Repeater mode, WISP mode, AP mode. All COMMANDO AirONE series Indoor AP default mode is AP mode.
• Plug and Play design simplifies installation with self-adaption.
• Compact, silent design perfect for noise sensitive environments.
• With Zero Touch Provisioning: Plug and play and no setup. Affordable, Easy-to-Use AP for Small Business Networks, with Zero Configuration Required.
• Built-in High-Performance Processor with long life, Suitable for Deployment of Large Scale Commercial Scenarios
• Comes with one-year default warranty – optionally extendable up to 3 years

 

 

Features and Benefits

Easy to Use

are WEB GUI based easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10, 100, or 1000Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS and setting channel bandwidth 20/40MHz wireless band and also can check free channels available with inbuilt Wi-Fi analysis. Its compact size makes it ideal for Indoor desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.

Gigabit LAN speed

It provides and offers a wide range of models for different network deployment requirements with gigabit speed. These energy efficient AP are well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.

Single, Dual and Triband Supports

Supports multiple frequency of operation with non-interference channels with maximum concurrent data rate of 900 Mbps in the 5GHz band and 400 Mbps in the 2.4GHz band with accumulated speed up to 2200Mbps in triband devices.

Wireless client supported

Supports up to Max wireless users/clients from 50 to 200+ with up to distance of 91 meters from AP in all directions depending on models.

Network Security

Support Flexible user Access Control Policies, Network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied to permit or deny Wi-Fi users.

Auto MDIX Capabilities

Auto sensing 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.

Compact and Silent Performance

It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.

Support uninterrupted critical network infrastructure

It has Dual power options with DC input power and PoE+ power input which protect from power failures and increases life of device . With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.

Cost Efficient

State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards , durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.

Green Technology

features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.

 

 
 

Software

COMMANDO AirONE Indoor AP supports software functions as follows.

Device Information like CPU Usage, Memory Usage, LAN Information like IP Mode Get IP From AC/Gateway/Static, Status with 2G Wi-Fi/5G Wi-Fi 1/5G Wi-Fi 2 Clients Status with information like SSID, Channel, Bandwidth, Encrypt, MAC Address, Operation Mode configure like AP/ Fat AP Mode with Uptime, Flow in bps for AP down stream and AP Up stream

Gateway Mode, Repeater Mode, WISP Mode, AP Mode (Default Selection)

2G Wi-Fi/ 5G Wi-Fi 1/ 5G Wi-Fi 2 depending on models for Wi-Fi Status ON/OFF, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2PSK_TKIPAES, MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option, Wi-Fi Timer Off/ON with Time Frame, Advanced setting like Country Region,2G Channel (1-13);5G Channel (36-64),(149-165),2G Mode/5G 1 Mode/5G 2 Mode, Multicast Fast, Maximum for per AP (Range 1-64), WLAN Partition, Short GI, Coverage Threshold(-95dBm~-65dBm), TX Power, Preferred 5G, DFS

Network

LAN Settings with DHCP server option, Static DHCP, VLAN Settings, Cloud Server Settings

Manage

Configure, Reboot, Modify Password, Upgrade, Time, Log

Table 1 Software functions

SOFTWARE FUNCTION
Wizard Function Gateway Mode: In Gateway mode, all Ethernet are bridged together and wireless clients will connect ISP access point or router connecting directly to the Internet via WAN PORT. NAT is enabled and PCs in Ethernet LAN port share the same IP to ISP through wireless LAN.
In Repeater mode is used to extend the range of wireless coverage of existing Wi-Fi network. This mode is suitable when you are in a Wi-Fi dead-zone or a place with weak wireless signal, and you want to have a larger effective range of the wireless signal throughout your home or office.
WISP Mode: In WISP mode, the device connects to ISP station or hot spot wirelessly to share network with local wired and wireless devices.
In AP mode, the device works as an access point to transform your existing wired network into a wireless network.
Flow in bps For AP downstream and AP Up stream
Network LAN Settings with DHCP server option, Static DHCP, VLAN Settings, Cloud Server Settings
Management Configure, Reboot, Modify Password, Upgrade firmware, Time setting with NTP and from PC, Log, Restore the factory default
Wi-Fi SSID name setting, Bandwidth, Channel, Encryption options like Open/Encryption like WPA/WPA2PSK_TKIPAES , MAC ACL, Wi-Fi Timer OFF/ON with Time Frame. Advanced setting like Country Region, 2G Channel (1-13);5G Channel (36-64),(149-165),2G Mode/5G-1 Mode/5G-2 Mode, Multicast Fast, Maximum for per AP (Range 1-64), WLAN Partition, Short GI, Coverage Threshold (-95dBm~-65dBm), TX Power, Preferred 5G, DFS.

 

 
 

Hardware

Solid performance with non-blocking architecture

• Up to 32 MB Flash, 512MB DDR3 RAM
• All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
• Solid performance with non-blocking architecture.

Physical Ports and Networking Interfaces

• Up to 2 x 10/100/1000 Mbps Rj45 Ethernet Ports with combined PoE+ with WAN and separate LAN port
• LED Indicators :Power, Link/Act
• Reset Button

Extra Long operational life

• High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
• Support temperature range 0° C to 50° C
• Desktop and Wall mount design that enables to mounts Which enables horizontal and vertical wall mounting.

Noise-free Operation

• The ports support reduced power modes for silent operation. Perfect for noise sensitive environments.
 

Table 2 Hardware Specifications

SPECIFICATION
Standard 802.11ac/b/g/n,MU-MIMO technology
RAM Up to 512MB
Flash Up to 32MB
Interface 2* 10/100/1000M LAN/WAN with PoE+ option Port
Reset Hardware button
Power DC In 12V up to 1A-2A and POE IN 48V ( IEEE 802.3at )
Max Power Consumption Up to 24W
Antenna Build in 5 dBi MIMO Antenna
User Capacity 100+ to 256+
Dimension Up to 198mm X 32mm varies with Models
Working Temperature 0°C to +50°C
Working Humidity 5%~95%RH(Non-condensing)
Warranty Period 1 Year
Indicator Light Power, Link/ACT

 

 
 

Specifications

Technical Specifications

Supports Triple Radio 2.4GHz+5GHz+5GHz, 802.11ac, with Standalone models with Multi SSIDs up to 12 with either open or WPA/WPA2PSK_TKIPAES encryption with Dual option for input Power supply with either 48V POE+ or DC input power and also have MIMO High Gain Omni 2.4G/5G with 5dBi Internal Antenna.

Table 3. Specifications

Technical Parameters Specification
Hardware Specifications 1*10/100/1000Mbps auto-negotiation WAN port or IEEE 802.3at PoE+ port
1*10/100/1000Mbps auto-negotiation LAN port
1* Reset button/Restore to factory default
1*DC Port
Memory 128~512MB RAM
Flash 16~32MB
IEEE Standard IEEE 802.11b ,IEEE 802.11g ,IEEE 802.11n , IEEE 802.11ac MIMO technology
Data Transfer Rates For Single band
IEEE 802.11b up to 11Mbps
IEEE 802.11g up to 54Mbps
IEEE 802.11n up to 300Mbps
IEEE 802.11ac up to 900Mbps
Frequency Triple Radio 2.4GHz+5GHz+5GHz
Throughput Up to 2200Mbps
Network Functions 802.1q Tag based VLAN, DHCP Server, Static, PPPoE
Wi-Fi Operational Modes AP, Repeater, WISP Mode, Gateway Mode
Wireless Security Open or Encryption WPA/WPA2PSK_TKIPAES option
Multiple SSID For Single band 4 SSIDs, Dual Band 8 SSID and Triband 12 SSID.
Access control Features MAC Access Control
Enclosure Type Desktop/Wall/Ceiling mounted depending on models.
Wi-Fi Transmit Power Up to 26 to 28dbm
Input Power Supply WAN port PoE+ OR DC 12V ,1A~2A
Management Web based management Backup & Restore to default Settings
ENVIRONMENTAL Operating Temperature: 0° C to +50° C (+32° F to +122° F)
Humidity: 5% to 93% non-condensing
Storage and transportation Temperature: -40° C to +70° C (-40° F to +158° F)
Weight `1Kg
 

Table 4. Model Comparison

Features AIR-AP2200 AIR-AP1300 AIR-AP1200 AIR-AP750 AIR-AP300
Standalone/Controller Based Protocol Standalone AP Standalone AP Standalone AP Standalone AP Standalone AP
Flash 32MB 32MB 16MB 16MB 16MB
RAM 512MB 512MB 128MB 128MB 128MB
Standard IEEE802.11AC/N/G/B IEEE802.11AC/N/G/B IEEE802.11AC/N/G/B IEEE802.11AC/N/G/B IEEE802.11N/G/B
Frequency 2.4GHz+5GHz+5GHz 2.4GHz+5GHz 2.4GHz+5GHz 2.4GHz+5GHz 2.4GHz
Wireless data rate 400Mbps+900Mbps+900Mbps 400Mbps+900Mbps 300Mbps+900Mbps 300Mbps+450Mbps 300Mbps
WAN 10/100/1000M WAN*1 10/100/1000M WAN*1 10/100/1000M WAN*1 10/100M WAN*1 10/100M WAN*1
LAN 10/100/1000M LAN*1 10/100/1000M LAN*1 10/100/1000M LAN*1 10/100M LAN*1 10/100M LAN*1
DC DC:12V 2A DC:12V 1.5A DC:12V 1.5A DC:12V 1.5A DC:12V 1A
PoE Power WAN Port 48V 802.3at POE+ WAN Port 48V 802.3at POE+ WAN Port 48V 802.3at POE+ WAN Port 48V 802.3at POE+ WAN Port 48V 802.3af POE
Technology Supported Wave 2 Wave 2 Wave 2 - -
Modes Supported 4 in 1 4 in 1 4 in 1 4 in 1 3 in 1 (WISP mode not supported)
Frequency Band 2.4 GHz + 5 GHz + 5GHz 2.4GHz+5GHz 2.4GHz+5GHz 2.4GHz+5GHz 2.4GHz
RF Power ≤26dBm ≤26dBm ≤28dBm ≤27dBm ≤27dBm
Distance covered Up to 91 Meters Up to 91 Meters Up to 91 Meters Up to 91 Meters Up to 45 Meters
Size 198mmx198mmx28mm 198mmx198mmx28mm 198mmx198mmx28mm 188mmX188mmX50mm 168mmX168mmX32mm
Max. SSID Up to 12 Up to 8 Up to 8 Up to 8 Up to 4
End Users Access users 256 max, concurrent end users 200 Access end users 128 max, concurrent end users 100 Access end users 128 max, concurrent end users 120 Access end users 128 max, concurrent end users 90 Access end users 64 max, concurrent end users 50
 

Table 5 .COMMANDO AirONE Series AP LED indication

LED Indicator LED Status
Power PoE+/ DC power given.
WAN WAN connects with Gateway or PoE+ devices and Green shows activity on WAN port.
LAN LAN Connect to end users and Green shows activity on LAN port.

Included in the Box

COMMANDO AirONE Series Indoor AP

All COMMANDO AirONE series Indoor AP made available for use globally along with accessory used to facilitate or enhance operations. All COMMANDO AirONE series Indoor AP Comes with following Accessories.

COMMANDO AirONE series Indoor AP.

• 1X Patch Cord
• Wall Mount with Mounting Screws
• LAN cable

 

 
 

Support and Warranty

• Same-day assistance.
• Comprehensive 24-hour support using common communication/chat platforms, Email and Telephone.
• Provide FAQs and troubleshooting help online (self-service) through cloud-based solutions.
• Highly technical and trained representatives to resolve issues.
• One-year default warranty with option of warranty extension up to 3 years

 

 

 

Table 6. Support and Warranty

Warranty and Support
Products covered COMMANDO AirONE Series Indoor Wireless Access Points
Warranty duration One Year RTB (Return To Base) replacement warranty – optionally extendable up to 3 years.
Hardware replacement COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request.
End-of-life policy In case of discontinuation of the product, support is limited to 3 years from announcement date.
Effective date Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO).
Support duration Lifetime support.
COMMANDO Care COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration.
Online Portal Access Warranty allows guest access to commandonetworks.com for all available technical queries.

 

 
 

Ordering Information

Ordering information for the COMMANDO AirONE series Indoor AP,To place an order, please contact your local reseller/distributor or COMMANDO Sales Representative at www.commandonetworks.com/ordering

Table 7. COMMANDO AirONE series Indoor AP Ordering Information

Product Code Information
AIR-AP300 COMMANDO AirONE 300Mbps, 2.4GHz, 802.11n, MIMO, Indoor Access Point
AIR-AP750 COMMANDO AirONE 750Mbps, 2.4GHz+5GHz Dual Radio, 802.11ac, Indoor Access Point
AIR-AP1200 COMMANDO AirONE 1200Mbps, 2.4GHz+5GHz Dual Radio, 802.11ac,Wave 2.0 MU-MIMO Indoor Access Point
AIR-AP1300 COMMANDO AirONE 1300Mbps, 2.4GHz+5GHz Dual Radio, 802.11ac, Wave 2.0, MU-MIMO, Indoor Access Point
AIR-AP2200 COMMANDO AirONE 2200Mbps, 2.4GHz+5GHz+5GHz Triband Radio, 802.11ac, Wave 2.0, MU-MIMO, Indoor Access Point

 

 

Document History

Release New or Revision Described in Date
Release 1 First Release First Release March 15, 2021

 

 

COMMANDO Networks Whatsapp
COMMANDO Networks Telegram