Product Overview
COMMANDO AirX AIR-AP3600BE is a Wi-Fi 7, Cloud Access Point Indoor Access Point which works in standalone as well as COMMANDO RouteX controller-based mode of operation. It enables communication between wireless users with speed up to 3600Mbps with beamforming Wi-Fi technology. It is standalone as well as controller-based device, comes with dual band with 2.4GHz (688Mbps) and 5GHz (2882Mbps), equipped with 1x2.5Gbps RJ-45 Port. It can provide powerful wireless coverage to enterprise environments such as Small, Medium enterprises, university campus, concert venue, gymnasium, Commercial establishments etc.
It is indoor Wall/Ceiling AP which can install at every place to work as a stable base station for access users. It supports (IEEE 802.3at) PoE+ as well DC power supply, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
Product Highlights
- Cloud Managed 4x4 Indoor Wi-Fi 7 Access Point
- Dual Radio Access Point (2.4 GHz/5 GHz) , 4x4 MIMO stream for IEEE802.11be (Wi-Fi 7) operation greatly improves communication efficiency.
- Up to 3.6 Gbps 2.4GHz(688Mbps) and 5GHz(2882Mbps)
- Equipped with 1*2.5Gbps Port, dual purposes IEEE 802.3at Port (PoE+) port supporting 1x 10/100/1000/2500Mbps.
- Wi-Fi 7 standard supports ultra-wide 320 MHz channels that can deliver extreme throughput and provides greater network capacity.
- 4-MU-MIMO, 4096-QAM, which increase overall performance, reliability, and high-density device support by utilizing multiple bands, avoiding interference, and reducing latency.
- Cutting-edge COMMANDO Cloud for centralized management and mass scalability.
- Access point monitoring with COMMANDO RouteX controller and COMMANDO Cloud for real-time remote monitoring and troubleshooting.
- FAT mode support multiple operational modes like AP, routing mode (Default mode is FIT-AP mode).
- Multi SSID up to 8 with inbuilt Wi-Fi channel analysis.
- Management with the help of WEB GUI, COMMANDO RouteX Controller and from Cloud portal.
- Supports IEEE 802.11be/ax/ac/a/b/g/n with backward compatibility for wireless clients, 2.4GHz+5GHz Wireless dual band.
- Built-in 5dBi MIMO Antenna with wireless RF power adjustable as per user movements from AP.
- Access end users up to 130+.
- Supports band steering automatically moves to wider 5G band for faster connections, intelligent load balance based on users.
- Supports Wi-Fi client distance 35 meters and above depending on surrounding conditions.
- Dual input for power either PoE+ via WAN/LAN port or DC power inputs 12V, 2A.
- Support Open or encryption like WPA3, WPA/WPA2PSK_TKIPAES.
- With the function of the built-in firewall, IP filter, URL filter, and MAC filter.
- Comply with IEEE 802.3az standard.
- Plug and Play design simplifies installation with self-adaption.
- Compact, silent design perfect for noise sensitive environments.
- With Zero Touch Provisioning with plug and play and no setup. Affordable, Easy-to-Use AP for all sized business networks, with Zero Configuration Required.
- Comes with one-year default warranty – optionally extendable up to 3 years.
Features and Benefits
Wi-Fi 7 (IEEE 802.11be)
It has ultra-wide 320 MHz channels with 4K-QAM and features like Multi-Link Operation (MLO) which allows a device to simultaneously connect on multiple bands, enabling faster speeds by aggregating bandwidth, with more reliable Wi-Fi connections on multiple concurrently used bands. In Wi-Fi 6, the spectrum resource could be wasted if the channel encounters signal interference. With Multi-RU and Puncturing, Wi-Fi 7 devices will be able to take full advantage of the remaining part of the channels that is not being used or interrupted. This way, the Wi-Fi bandwidth can be used efficiently to make data transmission quicker and more reliable and Puncturing. It has 4-MU-MIMO, 4096-QAM, which increase overall performance, reliability, and high-density device support by utilizing multiple bands, avoiding interference, and reducing latency.
2.5Gigabit Ethernet speed
It provides 2.5Gbps speed on RJ-45 port. It Comply with IEEE802.3bz standard with energy efficient, well built, rigorously tested and can sustain very rough environment and provides reliable speed performance.
Wireless client supported
Supports up to 130+ wireless users/clients and supports distance of 35 meters and above from AP in all directions for wireless clients.
FIT & FAT Mode
It supports FIT/FAT operation mode. In FIT mode, AP works with COMMANDO RouteX controller and all configuration is centrally managed by cloud portal also. In FAT mode, AP can use WEBGUI and configure AP and routing mode.
MU-MIMO Technology
It adopts 4-MU-MIMO, 4096-QAM modulation, supports MU-MIMO (Multi-User Multiple-Input Multiple-Output), 4 Spatial steams greatly improve communication efficiency.
Dual Power Option
It supports Power over Ethernet IEEE802.3at Power over Ethernet (PoE+), as well as power can be fed from 12V, 2Amp adaptor for easy installation and lower cost. So, it can be installed in areas where power outlets are not readily available.
Easy to Use
COMMANDO AIR-AP3600BE is standalone WEB GUI based as well as controller-based cloud access point which is easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10/100/1000/2500Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS. It can check free channels available with inbuilt Wi-Fi analysis. It is ideal for installation to any desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
Firewall
Support Flexible user Access Control Policies and network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied like URL Filter , IP Filter , MAC Filter , Port Mapping and DMZ to permit or deny Wi-Fi users.
Auto MDIX Capabilities
Auto sensing 10/100/1000/2500Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
Compact and Silent Performance
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
Support uninterrupted critical network infrastructure
It is equipped with dual power options, including DC input and PoE+ support, providing redundancy to safeguard against power failures. This dual-power architecture ensures continuous operation of the device, mitigating potential downtime and extending its operational lifespan. By integrating this feature, businesses can protect against the financial and operational risks associated with power disruptions, ensuring uninterrupted connectivity for critical network devices, users, and servers.
Value for Money
State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
Green Technology
It features the IEEE 802.3az standard, energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.