COMMANDO AirX Wireless Series offer Cloud based Access Points (Indoor and Outdoor) and Wireless Bridges. Access Points work as Standalone as well as Controller-based. COMMANDO RouteX Gateway is Multi-Service device that acts as a Wireless Controller as well for all AirX Series Wireless products. AirX Series offer Cloud based high speed unified wireless solution with Captive Portal. It offers high speed Wi-Fi 6 and Wi-Fi 7 products offering most stable and seamless wireless performance.
Super Wds mode where bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. All bridges act as master and slave simultaneously. With this Super WDS meshing of bridges makes network failure rate to zero. It enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 18/15/11 dBi Internal Antenna as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the CPE and base station. It provides low latency, high throughput in PTP/PTMP/MTMP application likes IP camera, long range Wi-Fi Transmission with Beamforming Technology.
COMMANDO AirPRO Series Wireless Bridge complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 25/16/10dBi MIMO Internal Antenna as per model specifications. All Wireless Bridges Support HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the CPE and base station. It provides low latency, high throughput in PTP/PTMP/MTMP application likes IP camera, long range Wi-Fi Transmission with Beamforming Technology.
COMMANDO AirACE Series Wireless Bridge comes with default AP mode where bridge be step up by keeping one device in CPE mode and one device in AP mode. It supports speed up to 300Mbps with IEEE 802.11a/n standard along with build in MIMO 8~13dBi Internal Panel Antennas as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the AP and Base Station. It provides low latency, high throughput in PTP application likes IP camera, long range Wi-Fi Transmission with Beamforming Technology. It can have Multi SSID up to 4.
It has IP65 Waterproof and Dust proof Enclosure casing with 24V Passive PoE power input. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the backend, the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.
COMMANDO AirNET Series Wireless Bridge comes with default AP mode where bridge be step up by keeping one device in Station mode and one device in AP mode and supports Super Channel Setting, Diagnostics Network Utilities, Network Watchdog (NWD) and Auto power adjustment. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 27/25/23/20dBi Internal Antenna as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the AP and Base Station. It provides low latency, high throughput in PTP application likes IP camera, long range Wi-Fi Transmission with Beamforming Technology.
It has separate Gigabit 1 WAN & 1 LAN port IP65 Waterproof and Dust proof Enclosure casing. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the backend the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.
COMMANDO AirBULLET 150Mbps, 802.11n, Driver-Free, Wireless USB Adapter is fast wireless using IEEE802.11b/g/n. It provides single band connectivity for speeds up to 150Mbps in 2.4G band. It can be used for browse, stream, chat, and play online games without any delay. The 64/128-bit WEP, complies with 128bit WPA standard (TKIP/AES), supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X encryption that provides a protected wireless network connection and protects transmitted data.
