Product Overview
COMMANDO AirX AIR-APO1200 is a dual Radio, Cloud Outdoor Access Point with works in standalone as well as AirX Controller based mode of operation. It is industrial grade Outdoor AP with weather resistant IP65 case specifically for outdoor installations. It enables communication between wireless users with speed up to 1200Mbps with beamforming Wave 2 technology. It is standalone as well as controller-based device, comes with dual band with 2.4GHz (300Mbps) and 5GHz (867Mbps), equipped with separate 1G WAN port and 1G LAN port. It can provide powerful wireless access in large-scale, low-density, high-bandwidth environments such as hotels, supermarkets, offices, restaurants, enterprise environments such as Small, Medium enterprises, university campus, concert venue, gymnasium, etc.
It is industrial grade APO which can install at every place to work as a stable base station for wireless users. Its ceiling-mounted design, integrated Ethernet interface, and sleek appearance make it easy to deploy, and it can be seamlessly integrated into the ceiling or wall without disrupting the overall interior design layout. It is an ideal choice for wireless access in large-scale, low-density, high-bandwidth environments. It supports (IEEE 802.3af/at) PoE/PoE+, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
Product Highlights
- FIT/FAT mode operation. FAT mode support multiple operational modes like AP, WDS, Routing mode (Default mode is FAT-AP mode).
- Multi SSID up to 10 with 2G and 5G band with inbuilt Wi-Fi channel analysis.
- Management with the help of WEB GUI, AirX WLAN Controller and from Cloud portal.
- Supports IEEE 802.11ac/b/g/n with backward compatibility for wireless clients, 2.4GHz+5GHz Wireless dual band.
- Built-in 2dBi FPC Antenna with wireless RF power adjustable as per user movements from AP.
- With Wave 2 MIMO technology, it adopts 256QAM modulation with 2 Spatial steams greatly improves communication efficiency.
- Access end users up to 128 max.
- Supports band steering automatically moves to wider 5G band for faster connections, intelligent load balance based on users.
- Dual purposes WAN or IEEE 802.3af/at Port (PoE/PoE+) port supporting 1x 10/100/1000Mbps and dedicated LAN ports 1x 10/100/1000Mbps.
- Supports Wi-Fi client distance 110 meters and above depending on surrounding conditions.
- Dual input for power either PoE/PoE+ via WAN port or DC power inputs 12V, 1.5A.
- Support Open or encryption like WPA/WPA2PSK_TKIPAES.
- Supports remote management via cloud platforms and WeChat mini-programs. Enables real-time remote viewing, configuration, upgrades, and maintenance.
- With the function of the built-in firewall, IP filter, URL filter, and MAC filter.
- Industrial grade IP65 case, weather resistant
- Comply with IEEE 802.3az standard
- Plug and Play design simplifies installation with self-adaption.
- Compact, silent design perfect for noise sensitive environments.
- With Zero Touch Provisioning with plug and play and no setup. Affordable, Easy-to-Use AP for all sized business networks, with Zero Configuration Required.
- Comes with one-year default warranty – optionally extendable up to 3 years.
Features and Benefits
FIT and FAT Mode
It supports FIT/FAT operation mode. In FIT mode, AP works with the AirX Controller and all configuration is centrally managed by controller. In FAT mode, AP can use WEBGUI and configure AP, WDS and routing mode.
Wave 2 MU-MIMO Technology
It adopts 256QAM modulation, supports MU-MIMO (Multi-User Multiple-Input Multiple-Output), 2 Spatial steams greatly improve communication efficiency. Beamformingtechnology that concentrates the wireless signal in specific directions, enhancing the transmission and reception performance of the signal.
Dual Power Option
It supports Power over Ethernet IEEE802.3at (PoE/PoE+), as well as power can be fed from 12V, 1.5Amp adaptor for easy installation and lower cost. So, it can be installed in areas where power outlets are not readily available.
Weatherproof Enclosure with IP65
It has IP65 resilient weatherproof enclosure protects the access points against harsh outdoor condition. Lightning Protection ±6KV with no Ingress of dust as well as waterproof enclosure.
User-Friendly Interface
It is standalone Web GUI based as well as controller-based cloud access point which is easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10/100/1000Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS. It can check free channels available with inbuilt Wi-Fi analysis. It is ideal for installation to any desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
Gigabit Ethernet speed
It provides with Gigabit Ethernet speed for LAN and WAN port. It Comply with IEEE 802.3az standard, energy efficient AP is well built, rigorously tested and can sustain very rough environment and provides reliable performance.
Wireless client supported
Supports up to 128 wireless users/clients and supports distance of 110meters and above from AP in all directions for wireless clients.
Firewall
Support Flexible user Access Control Policies and network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied like URL Filter, IP Filter, MAC Filter, Port Mapping and DMZ to permit or deny Wi-Fi users.
Auto MDIX Capabilities
Auto sensing 10/100/1000Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
Compact and Silent Performance
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
Supports uninterrupted critical network infrastructure
It is equipped with dual power options, including DC input and PoE/PoE+ support, providing redundancy to safeguard against power failures. This dual-power architecture ensures continuous operation of the device, mitigating potential downtime and extending its operational lifespan. By integrating this feature, businesses can protect against the financial and operational risks associated with power disruptions, ensuring uninterrupted connectivity for critical network devices, users, and servers.
Value for Money
State of art quality product that can serve on real time high-speed performance with AC input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
Green Technology
It features the IEEE 802.3az standard, energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.