Product Overview
COMMANDO AirX AIR-APO3000AX is dual radio Wi-Fi 6 Cloud Outdoor Access Point. It works in standalone as well as Controller-based mode. RouteX Series Controller enables communication between wireless users with speed up to 3000Mbps with advanced Wi-Fi 6, OFDMA technology with built-in 2dBi FPC dual band MIMO Antenna. It is standalone device, comes with dual band with 2.4GHz (600Mbps 11ax 2x2) + 5GHz (2400Mbps 3x3), equipped with separate 1G WAN ports and LAN ports. The supports MU-MIMO and DL/UL-OFDMA modulation with 128 end users. These multiple users can upload or download multiple packets at the same time. It has narrower sub-carrier spacing and longer symbol time which improves the stability and data Processing efficiency, publicly to be used in high density access environment in large-scale, low-density, high-bandwidth environments such as hotels, supermarkets, university campus, offices, restaurants, enterprise environments such as Small, Medium enterprises, university campus, concert venue, gymnasium, etc.
It is powerful, long range and advance Wi-Fi 6 Outdoor Access Point with weatherproof IP65 casing and has configuration modes namely FAT and FIT mode (Default Mode is FAT mode). It supports range of 91 meters and above depending on surrounding conditions with 2dBi FPC antenna. It is industrial grade Wall/Ceiling IEEE 802.3af/at 48V PoE+ standard, install at every place to work as a stable base station for access users. It is equipped with separate Gigabit Ethernet WAN and LAN port.
It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It supports (IEEE 802.3af/at) PoE+, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
It can install at every place to work as a stable base station for wireless users. Its ceiling-mounted design, integrated Ethernet interface, and sleek appearance make it easy to deploy, and it can be seamlessly integrated into the ceiling or wall without disrupting the overall interior design layout. It is an ideal choice for wireless access in large-scale, low-density, high-bandwidth environments. It supports (IEEE 802.3af/at) PoE/PoE+, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
Product Highlights
- FIT/FAT mode of operation. In FAT support multiple operational modes like AP, WDS, Routing mode (Default mode is FAT-AP mode).
- Multi SSID up to 10 with 2G and 5G band with inbuilt Wi-Fi channel analysis.
- Supports IEEE 802.11ax/ac/b/g/n with backward compatibility for wireless clients.
- Management with the help of WEB GUI, RouteX Series WLAN Controller and from Cloud portal.
- Wireless Dual band with 2.4GHz (600Mbps 11ax 2*2) + 5GHz (2400Mbps 3*3) with radio RF Built-in 2dBi FPC Antenna.
- Supports wireless RF power adjustable as per user movements and environment.
- Supports data rate up to 3000Mbps.
- Dual band RF having 2.4G Wi-Fi 2*2 802.11b/g/n/ax (Speed up to 573Mbps), 5.8G Wi-Fi 3*3 802.11a/n/ac/ax (Speed up to 2402Mbps).
- Supports large wireless coverage 91m and above in all directions depending on surrounding conditions.
- 1024QAM ultra-high-speed access rate, OFDMA ultra-high-density user access OFDMA/MU-MIMO uplink/downlink.
- BSS Color spatial multiplexing.
- Space-time block code (STBC), low-density parity check (LDPC), uplink and downlink.
- Beam forming (Beam former TX/RX) Access end users 128 and Max 64 users to access each band.
- Supports 5G Prior band steering automatically moves to wider 5G band for faster connections, intelligent load balance based on users.
- Supports tag VLAN and VLAN management and client isolation to improve the wireless stability.
- Supports advance security by MAC ACL, Static DHCP, Flow control, URL Mapping, IP/MAC/URL filters, Port mapping and DMZ.
- Supports remote management via cloud platforms and WeChat mini-Programs. Enables real-time remote viewing, configuration, upgrades, and maintenance.
- With the function of the built-in firewall, IP filter, URL filter, and MAC filter.
- Industrial grade IP65 case, weather resistant
- Support Seamless Roaming, TWT and OFDM.
- Dual purposes WAN or IEEE 802.3af/at port supporting 1x 10/100/1000Mbps and dedicated LAN ports 1x 10/100/1000Mbps.
- Dual Power input either PoE/PoE+ via WAN port or DC power inputs 12V, 1.5A.
- Support Open or encryption WPA, WPA2PSK_TKIPAES, WAP2_EAP, WPA3.
- Energy saving with single antenna standby, dynamic MIMO power saving, enhanced automatic power saving transmission, packet-by-packet power control technology.
- Comply with IEEE 802.3az standard, Support Wi-Fi time on/off to save energy.
- Plug and Play design simplifies installation with self-adaption.
- Compact, silent design perfect for noise sensitive environments.
- With Zero Touch Provisioning: Plug and play and no setup.
- Affordable, Compatible and Easy-to-Use AP for all sized business networks. Suitable for Deployment of large-scale Commercial Scenarios
- Comes with 1 year default warranty – optionally extendable up to 3 years.
Features and Benefits
FIT and FAT Mode
It supports FIT/FAT operation mode. In FIT mode, AP works with the RouteX Series controller and all configuration is centrally managed by controller. In FAT mode, AP can use WEBGUI and configure AP, WDS and routing mode. Default mode is FAT mode.
Wi-Fi 6 Technology
The IEEE 802.11ax is an emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. Equipped with the latest and fastest Wi-Fi 6 (802.11ax) technology, Multi-User (MU) Orthogonal Frequency Division Multiple Access (OFDMA). This subdivides the Wi-Fi channel into smaller frequency allocations (called Resource Units). Spatial reuse also known as BSSID coloring allows the access points and their clients to differentiate between other SSID, thus permitting more simultaneous transmissions. This capability permits an Access Point to synchronize communication with multiple individual client devices at the same time on the uplink and downlink when it comes to sending and receiving data at 3000Mbps.
Gigabit Ethernet speed
It provides Gigabit Ethernet speed for LAN and WAN port. It Comply with IEEE 802.3az standard, energy efficient AP is well built, rigorously tested, and can sustain very rough environment. RF power adjusts according to congestion or disturbance in environment and provides reliable performance.
Weatherproof Enclosure with IP65
It has IP65 resilient weatherproof enclosure protect the access points against harsh outdoor condition. Lightning protection ±6KV with no Ingress of dust as well as waterproof enclosure.
Easy to Use
It is standalone as well as controller-based Web-GUI easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10/100/1000Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS. It can check free channels available with inbuilt Wi-Fi analysis. It is ideal for installation to any desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
Wireless client supported
Supports 128 wireless users/clients with Max 64 users to access each band. It supports distance of 91 meters and above from AP in all directions for wireless clients.
Supports uninterrupted critical network infrastructure
It is equipped with dual power options, including DC input and PoE/PoE+ support, providing redundancy to safeguard against power failures. This dual-power architecture ensures continuous operation of the device, mitigating potential downtime and extending its operational lifespan. By integrating this feature, businesses can protect against the financial and operational risks associated with power disruptions, ensuring uninterrupted connectivity for critical network devices, users, and servers.
Firewall
Support Flexible user Access Control Policies and network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied like URL Filter, IP Filter, MAC Filter, Port Mapping and DMZ to permit or deny Wi-Fi users.
Auto MDIX Capabilities
Auto sensing 10/100/1000Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
Compact and Silent Performance
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
Value for Money
State of art quality product that can serve on real time high-speed performance with AC input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to the money.
Green Technology
Energy saving with single antenna standby technology, dynamic MIMO power saving technology, enhanced automatic power saving transmission technology, packet-by-packet power control technology. It features the IEEE 802.3az standard, energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.