COMMANDO AirNET, Dual Band, 1167Mbps, Ext Directional Ant, 1GE, Outdoor Access Point
AIR-APO1200+DIR
COMMANDO AirNET, Dual Band, 1167Mbps, Ext Directional Ant, 1GE, Outdoor Access Point
COMMANDO AirNET Out Door Access Point, Dual Band 2.4GHz+5GHz, 802.11ac, 1167Mbps, External Directional Antennas, Dual Frequency 2.4G/5.8G, 2.4G 14dBi & 5.8G 17dBi, 500mW/27dBm High Power, 16M Flash, 128M DDR2 RAM, PoE Support, Access Point Mode
Information
Main Features
- Dual Band 2.4GHz+5GHz
- 1167Mbps Data Rate
- Comply with IEEE 802.11ac/b/g/n,
- 4 External Directional Antennas
- 2.4G 8dBi & 5.8G 8dBi
- 500mW/27dBm High Power, Qualcomm Chipset, 16M Flash, 128M DDR2 RAM,
- Support 48V active PoE, work with IEEE 802.3at standard PoE switch or 48V PoE adapter.
- Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz), support tag VLAN based on SSID to protect the whole data safety.
- 1*10/100/1000Mbps Port
- Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
- Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
AIR-APO1200+DIR is a 1200 Mbps outdoor wireless AP, 4 External Directional Antennas, It supports Wireless AP, Gateway, WISP, Wireless Bridge operation mode, effective solution outdoor Wi-Fi coverage application. With an outdoor waterproof and dustproof enclosure, built in lighting protection IC, support 24V passive PoE, MIMO Technology, 1200Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.
Features
1200Mbps High Data Rate, High Performance and Adjustable RF Power
Equipped enterprise high performance Qualcomm Chipset, Comply IEEE 802.11n MIMO Technology, 1200Mbps high speed, allow all connected devices to achieve faster upload/download Ethernet. With powerful amplifier, improved the Wi-Fi range for some area with small quantity wireless AP, Can cut down RF power to suit for some high density wireless AP area to avoid Wi-Fi interference.
Power over Ethernet (PoE)
Integrated IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, plug and play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Multiple Operation Mode for Multiple Application
Support Wireless AP, Gateway, Wi-Fi Repeater to meet with different installation requirements, such as Gateway for home use, Wi-Fi Repeater to extend the exist Wi-Fi signal to more range
Multi SSID, Tag VLAN, AC Controller Centralized Management, Cloud Server Captive Portal Authentication
Support Multi SSID up to 4, each SSID support tag VLAN for User isolation. Work with WLAN Controller, centralized configuration in IP address, SSID, Password, Tag VLAN, RF power adjustable, then remote management, easy to achieve Wi-Fi Coverage and maintenance. Besides that, access into cloud server to do advertisement and Captive Portal authentication guest, to create more business value.
Specification
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100/1000Mbps RJ45 Port 1 * Reset button, press 15 seconds to revert to default setting |
| Antenna | 4 External Directional Antennas |
| Power consumption | 48V PoE<30W |
| Size | 315mm * 145 mm * 80 mm |
| RF Data | |
| Frequency | 2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac 2.4GHz: 2.312GHz to 2.4835GHz 5GHz: 5.020 - 6.1000 GHz |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK |
| Data Rate | 1200Mbps (2.4G 300Mbps, 5.8G 900Mbps) |
| Receive Sensitivity & RF Power | |
| RF Power | 2.4G: 11n @MCS7:23±2DB, @MCS0:25±2DB 11g @54M:24±2DB, @6M:26±2DB 11b @11M:26±2DB, @1M:28±2DB 5.8G: 11a @54M:24±2DB, @6M:26±2DB 11n @MCS7:22±2DB, @MCS0:24±2DB 11ac @MCS9:21±2DB, @MCS0:23±2DB |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0 11g: -72dbm@54Mbps, -88dbm@6Mbps 11b: -85dbm@11Mbps, -94dbm@1Mbps 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps 11n: -70dbm@MCS7, -90dbm@MCS0 11ac:-60dbm@MCS9, -86dbm@MCS0 |
| EVM | 11n: <=-28 DB 11g: <=-25 DB 11b: <=-10 DB 11a: <=-25 DB |
| PPM | ±20ppm |
| Max Users | 128 |
| Firmware Features | |
| Operation mode | Wireless AP |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK, 802.1x encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
| Protocols | IPv4 |
| Others | |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -40°C~55°C Storage Temperature: -40°C~70°C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management System |
Awards
Certificate
Download 'COMMANDO Networks' Mobile App Available on App Store and Google Play
Whether you are browsing the web or on the go, you can easily add content to your queue with our mobile apps. Save time and get more done by working from anywhere.