Configuration Guide

COMMANDO AirONE AIR-CPE1K+ Wireless Bridge Configuration Guide

1 Overview

COMMANDO AirONE series AIR-CPE1K+ Bridge enables communication between wireless and wired computers/laptops and mobile devices in the networks up to 1Km distance without physical wiring

2 Introduction

COMMANDO AirONE AIR-CPE1K+ is WEB GUI based easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free

3 Home

After login, home page will be showed. This page will show device Information like CPU Usage, Memory Usage, LAN/WDS/WAN Information like IP Mode Get IP From AC/Gateway/Static, Status

4 Setup Wizard

After clicking Wizard page, you can set device in Gateway Mode, Repeater Mode, AP Mode & Super WDS Mode (Default Mode). It provides flexibility to configure wireless bridge based on network

5 Device List

Device List/CPE Manage will display working bridge channel along with description, MAC Address, IP Address, Signal, Online/Offline Status & Uptime of connected bridge.

Wi-Fi Analyzer is a handy tool which helps you to select a better channel and mainly to analyze the AP’s signal strength and channel, to make user easier to choose the channel with less Wireless Interference.

7 Network Config

It can set Lan IP (Access IP), Subnet & DHCP Server, Start and maximum DHCP address, DHCP Lease Time and client list along with utilized IP count.

8 Security

Organizations can create policies such as permanently allowing or blocking access to specific sites or groups of websites, such as social networking pages to either redirect, filter or blocked.

9 Device Manage

Back up to save the configuration file to PC connected. Restore Bridge to known configuration. Reset the factory default settings. Telnet can be Enabled or disabled.