Information
AIR-WB5G-15K-PRO is a 300Mbps outdoor wireless Bridge, 2*2 MIMO Outdoor High Power Integrated 25dBi Antenna, 15KM Outdoor Wi-Fi Distance Coverage, Effective solution for outdoor Wi-Fi coverage application. With an outdoor Waterproof and Dustproof enclosure, built in lighting protection IC, support 24V passive PoE, 2T2R 300M MIMO Technology, 300Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.
At-a-Glance
- 300Mbps outdoor wireless Bridge
- Modes Of Operation: AP, Wireless Client, AP Repeater, Mesh
- 2*2 MIMO Outdoor High Power Integrated 25dBi Antenna
- Wireless Power 27dBm
- Supports PTP Distance up to 15KM
- Supports Super TDMA Technology (Time-division multiple access)
- Support 24V POE
- Build in 25dBi Dual-polarized Directional Antenna
- 2T2R 802.11ac, 300M MIMO Technology
- Waterproof and Dustproof Enclosure
Features
AIR-WB5G-15K-PRO Supports Super TDMA Technology (use polling technique to solve the hidden node and resource waste problem between the wireless Bride and base station, provide low latency, high throughput in PTP application.
300Mbps High Data Rate, High Performance
AIR-WB5G-15K-PRO supports Modes Of Operation: AP, Wireless Client, AP Repeater, Mesh suit for variety application environment.. Easy to setup IP address, signal strength, avoid the complex setup program, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
Time-division multiple access
Time-division Multiple Access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots
The users transmit in rapid succession, one after the other, each using its own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity
Power over Ethernet (PoE)
IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, 24V passive PoE Integrated, Plug and Play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Specification
