COMMANDO Scout IE1000 series Switches consists of Industrial unmanaged switches which are ideal to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, outdoor applications with high power PoE/PoE+ requirement on all ports of Switch ideal for small to medium-sized businesses, Industrial and outdoor use for Internet cafes, hotels, schools and surveillance purpose which required PoE/PoE+ (IEEE802.3af/at) power on all ports of switch which provides power to network devices like surveillance cameras, network printers, wireless APs and all PoE/PoE+ capable devices support temperature range -40°C to 75°C with IP40 casing. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks.
It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as PoE/PoE+ with power budget for all ports while reducing energy consumption and minimizing noise. This series switches are available in 4 to 8 Gigabit Ethernet ports with 2/2 modular copper/fiber Uplinks having enclosure type desktop, Rack/Wall mountable - 1U . Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations all ports PoE/PoE+ switches.
It can be quickly set up with plug and play with Zero Touch Provisioning . It is SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+ reliable performance at a very affordable cost. This switch Giga ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables and supports up to 250 meters distance for copper cables length.
It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+ power output for transmissions based on the cable length for PoE/PoE+ devices connected . It can also set any ports that are not transmitting traffic to sleep mode.
It is an ideal unmanaged switch, designed for Small and Medium Business Networks that require Plug & Play Network Switch. To optimize traffic on your Business Network, COMMANDO offers Port-based/802.1p/DSCP QoS to keep Latency-sensitive traffic moving smoothly and jitter-free. Additionally, port-based, tag-based and MTU VLAN can improve security and meet more network segmentation requirements. Moreover, with its innovative energy-efficient technology, COMMANDO Switch can save up to 58% of power consumption, making it an eco-friendly solution for your business network.
COMMANDO Scout IE1000 series Switches is easy to use and manage. All switches are Plug-and-Play devices that requires no configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (Either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops as well as rackmount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis
Small form-factor, fanless design for silent operation. Perfect for noise sensitive environments.
Auto sensing/Auto PoE/PoE+ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.
Designed tough for industrial use with IP40 casing , shock and vibration resistance. It can withstand harsh environments with temperature ranges (-40°C to +75°C). Hardened for vibration, shock and surge, and electrical noise immunity.
It support all ports with (PoE/PoE+) Power Budget. This series switches smartly adjust IEEE802.3af/IEEE802.3at PoE/PoE+ (up to 30 watts on all ports). All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable surveillance cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling and supports distance up to 250m.
COMMANDO Scout IE1000 series Switches features the Energy-Efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.
It Provides additional deployment flexibility, fiber connectivity with separate extra flexible ports or combo ports options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.
It has Dual DC input power which protect from power failures and power surges through their inline power supply automatically and have in build Surge protection of ±6KV. Due to inbuild dual DC power this device life is doubled than normal switches. With this feature protect on cost and the impact to your business by losing these network devices and thus the user’s PC /servers/cameras connected to them.
State of art quality product that can serve on real time high-speed Performance with Dual DC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards , durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.
COMMANDO Scout IE1000 series Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at along with Auto-MDIX function which automatically identify straight cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
COMMANDO Scout IE1000 Series Switches hardware supports L2 VLAN function with IVL, SVL, and IVL/SVL with 2-hash algorithm selection for L2 table searching/learning along with Aging timer range from 0.2s to 1600000s. IEEE 802.1Q VLAN with 4K-entry VLAN Table with limited learned L2 MAC entry on each port and each VLAN. Supports up to 16 spanning tree instances for MSTP (IEEE 802.1s), RSTP, and STP. It has 8K entries in the 4-way hash L2 table for MAC address learning and searching also has two hash algorithms for IVL (Independent VLAN Learning), SVL (Shared VLAN Learning), and IVL/SVL (both Independent and Shared VLAN Learning) for flexible network topology architecture. Independent 512-entry L2/IP Multicast table for multicast function. Supports Reserved Multicast Addresses processing.
It also has per-port L2 storm filtering control mechanism which suppresses the flow rate of some specific packets for Unknown Unicast Storm, Unicast Storm, Unknown Multicast Storm, Multicast Storm, and Broadcast Storm. IEEE 802.3az Energy Efficient Ethernet (EEE) for 100Base-TX in full duplex operation and supports 10Base-Te for 10Base-T in full/half duplex. The Energy Efficient Ethernet (EEE) operational mode combines the IEEE 802.3 Media Access Control (MAC) Sub-layer with a family of Physical Layers defined to support operation in Low Power Idle (LPI) Mode. When Low Power Idle Mode is enabled, systems on both sides of the link can disable portions of the functionality and save power during periods of low link utilization. EEE operational mode supports IEEE 802.3 MAC operation at 100Mbps. For 100Mbps operation, the 100Base-TX PHY is supported interoperable with legacy 10Base-T PHYs over 100m of Class-D (Category 5) or better cabling.
It Supports broadcast, multicast, unknown- multicast, and unknown-unicast packet suppression control, IEEE 802.1x, IEEE 802.3az Energy Efficient Ethernet (EEE), IEEE 802.3x full duplex flow control. If one port’s received frame buffer is over the pause threshold, a pause-on frame is sent to indicate to the link partner to stop the transmission. When the port’s received frame buffer drops below the pause threshold, it sends a pause-off frame. It has Auto MDI/MDI-X, to adjusts automatically for straight-through or crossover cables on all 10/100/1000 speed ports. Loop protection, If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms. SFP fiber uplinks provides greater distance connectivity using Gigabit fiber uplinks. The switch provides an estimated cumulative energy savings due to green Ethernet features being auto enabled along with power budget sufficient for all ports.
|IE1000 Switch Parameter||Specification|
|Packet Buffer Memory||4.1 MB|
|Switching Method||Store and Forward|
|Switching Capacity||10Gbps to 20Gbps|
|MAC Address Table Size||8000 entries|
|Maximum packet length||10000 byte|
|Operation Temperature||-40° to 75°C|
|Storage Temperature||-40° to 85°C|
|Operation Humidity(relative, noncondensing)||10% to 90%|
|Storage humidity(relative, noncondensing)||5% to 90%|
|Input Power Supply||DC+DC ( 52V to 8A)|
|LED Indicator||Link/Act，PoE, PoE MAX，Power|
|Energy Saving||Comply with “EEE” Energy Efficient Ethernet (IEEE 802.3az)|
|Surge protection (kV)||±6 kV|
|Rack mountable||Desktop, Rack/ Wall mountable|
|SR #||Product Code||Enclosure Type||Ports||Main Interface||Uplink Interfaces||Fan (Number)|
|1||IE1000-4G+2SFP||Desktop, Rack/Wall mountable||4 10/100/1000M ports, 2 1G SFP Uplink slots||4 GE||2 SFP||Fanless|
|2||IE1000-8G+2SFP||Desktop, Rack/Wall mountable||8 10/100/1000M ports, 2 1G SFP Uplink slots||8 GE||2 SFP||Fanless|
|3||IE1000-4GP+1GE||Desktop, Rack/Wall mountable||4 10/100/1000M PoE+ ports, 1 10/100/1000M Uplink slot||4 GE||1 GE||Fanless|
|4||IE1000-4GP+2SFP||Desktop, Rack/Wall mountable||4 10/100/1000M PoE+ ports, 2 1G SFP Uplink slots||4 GE||2 SFP||Fanless|
|5||IE1000-4GP+2CF||Desktop, Rack/Wall mountable||4 10/100/1000M PoE+ ports, 1 10/100/1000M and 1G SFP Uplink slots||4 GE||1 GE and 1 SFP||Fanless|
|6||IE1000-8GP+2SFP||Desktop, Rack/Wall mountable||8 10/100/1000M PoE+ ports, 2 1G SFP Uplink slots||8 GE||2 SFP||Fanless|
IEEE 802.3X Flow Control Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. IEEE 802.3 af/at Power over Ethernet (PoE/PoE+) Provides up to 30 W per port having power budget available for all ports which allows support of the latest PoE/PoE+ capable devices such as Video IP phones, wireless access points, and advanced pan/tilt/zoom security cameras, as well as any 15.4 W IEEE 802.3af-compliant end device. This ensures that cost of additional electrical cabling and circuits reduced to zero also supports Temperature range from -40° to 75°C - with Auto-PoE power configuration means switch automatically assigns the required power to a port for a PD device up to 250meters of cable length.
|SR #||Product Code||Max no. of PoE+ (IEEE 802.3at) Ports||Dual Power Input||Voltage and Current||Switching Capacity (Gbps)||Packet Filtering Forwarding Rates (64-byte packet size Mpps)||Mean time between failures MTBF (hours)|
|1||IE1000-4G+2SFP||-||DC+DC||52V to 8A||12||8.93||315916|
|2||IE1000-8G+2SFP||-||DC+DC||52V to 8A||20||14.88||261562|
|3||IE1000-4GP+1GE||All ports up to 30W||DC+DC||52V to 8A||10||7.44||305101|
|4||IE1000-4GP+2SFP||All ports up to 30W||DC+DC||52V to 8A||12||8.93||215661|
|5||IE1000-4GP+2CF||All ports up to 30W||DC+DC||52V to 8A||10||7.44||305641|
|6||IE1000-8GP+2SFP||All ports up to 30W||DC+DC||52V to 8A||20||14.88||246516|
|LED Indication on Switch||LED Status|
|Power||Green OFF: No power on the switch., Green ON: The switch powered on|
|Link/Act||LINK/ACT bi-color LED:, OFF: Port disconnected or link fail., Green ON: 1000Mbps connected., Amber ON: 10/100Mbps connected., Green Flashing: 1000Mbps connected and Data in transit, Amber Flashing: 10/100Mbps connected and Data in transit|
|System||Green OFF: The system is starting,please wait, Green ON: The system is up and running|
|PoE||OFF: PoE/PoE+ power is not provided on port, Blue ON: PoE/PoE+ power is provided on port|
|PoE MAX||PoE MAX OFF: PoE Power budget is available in switch, Red ON: PoE Power budget is 95%|
All SCOUT IE1000 Series Switches are made available for use globally along with accessories in the bundle to facilitate for enhance operations.
The switch box comes included with the following accessories:
1x COMMANDO Soldier IE1000 Series Industrial Ethernet Unmanaged Switch
1x Power cable
1x Console cable
1x Rack/Wall mountable kit
|Warranty and Support|
|Products covered||COMMANDO Scout IE1000 Series Industrial Ethernet Unmanaged Switches|
|Warranty duration||One Year RTB (Return To Base) replacement warranty – optionally extendable up to 5 years.|
|Hardware replacement||COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request.|
|End-of-life policy||In case of discontinuation of the product, support is limited to 3 years from announcement date.|
|Effective date||Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO).|
|Support duration||Lifetime support.|
|COMMANDO Care||COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration.|
|Online Portal Access||Warranty allows guest access to commandonetworks.com for all available technical queries.|
|Product Code||Product Description||Interfaces|
|COMMANDO Scout 10/100/1000M Gigabit Ethernet Switches|
|IE1000-4G+2SFP||COMMANDO Scout IE1000 4GE,2SFP Uplinks,Industrial Ethernet Switch||4 10/100/1000M ports, 2 1G SFP Uplink slots|
|IE1000-8G+2SFP||COMMANDO Scout IE1000 8GE,2SFP Uplinks,Industrial Ethernet Switch||8 10/100/1000M ports, 2 1G SFP Uplink slots|
|COMMANDO Scout 10/100/1000M Gigabit Ethernet PoE+ Switches|
|IE1000-4GP+1GE||COMMANDO Scout IE1000 4GE PoE+,1GE Uplink,Industrial Ethernet Switch||4 10/100/1000M PoE+ ports, 1 10/100/1000M Uplink slot|
|IE1000-4GP+2SFP||COMMANDO Scout IE1000 4GE PoE+,2SFP Uplinks,Industrial Ethernet Switch||4 10/100/1000M PoE+ ports, 2 1G SFP Uplink slots|
|IE1000-4GP+2CF||COMMANDO Scout IE1000 4GE PoE+,1GE+1SFP Uplinks,Industrial Ethernet Switch||4 10/100/1000M PoE+ ports, 1 10/100/1000M and 1G SFP Uplink slots|
|IE1000-8GP+2SFP||COMMANDO Scout IE1000 8GE PoE+,2SFP Uplinks,Industrial Ethernet Switch||8 10/100/1000M PoE+ ports, 2 1G SFP Uplink slots|
|Release||New or Revision||Described in||Date|
|Release 1||First Release||First Release||1-Aug-20|