• AirNET WB
AirONE and AirPRO Wireless Series -- Indoor/Outdoor Access Points, Wireless Bridges
Gallery YouTube

COMMANDO AirNET Series Wireless Bridge comes with default AP mode where bridge be step up by keeping one device in Station mode and one device in AP mode and supports Super Channel Setting, Diagnostics Network Utilities, Network Watchdog (NWD) and Auto power adjustment. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 27/25/23/20dBi Internal Antenna as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the AP and Base Station. It provides low latency, high throughput in PTP application likes IP camera, long range Wi-Fi Transmission)with Beamforming Technology.

It has separate Gigabit 1 WAN & 1 LAN port IP65 Waterproof and Dust proof Enclosure casing. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the backend the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.

1
How to Install and Configure Wireless Bridge - COMMANDO AirONE AIR-WB-1K / AIR-CPE1K+, 802.11n
03 Feb 2023
2
How to Install and Configure Wireless Bridge - COMMANDO AirONE AIR-WB5G-10K / AIR-CPE10K+, 900Mbps
03 Feb 2023
3
How to Install and Configure Wireless Bridge - COMMANDO AirONE AIR-CPE10K+ / AIR-WB5G-10K, 900Mbps
01 Feb 2023
AIR-WB5G-10K

COMMANDO AirNET 10KM, 867Mbps, 5GHz, 802.11ac, 2x14dBi Ant, 25dBm, 2GE, Wireless Bridge


Highlights

Operation Modes: AP, Super WDS, Repeater, Gateway Modes
Wireless data rate: 867Mbps
Distance covered: Up to 10KM
Encryption: WPA/WPA2-PSK
Wi-Fi analysis: Inbuilt Wi-Fi channel analysis.
Standard: IEEE802.11ac/a
Frequency: 5.8GHz
WAN: 1 x 10/100/1000Mbps
LAN: 1 x 10/100/1000Mbps
Casing: Weatherproof Enclosure with IP65
POE Power: 24V Passive POE
Antenna: 15dBi Panel Antenna
RF Power: 500mW
Lightning Level: Common mode: 6KV; Differential mode +2kV
Flash/RAM: 16MB/128MB
PoE IN: 24V, 1A
DC IN: 12V, 1A
Restore factory default: 1x Reset Button/ Software based
Operating and Storage Temperature: -40°C to +70°C
Operating Humidity: 5%~95%RH Non-Condensing

https://www.commandonetworks.com/wireless/AIR-WB5G-10K
AIR-WB5G-10K-HG

COMMANDO AirNET 10KM, 867Mbps, 5GHz, 802.11ac, 2x16dBi High Gain Ant, 25dBm, 1GE, Wireless Bridge


Highlights

Operation Modes: AP, Super WDS, Repeater, Gateway Modes
Wireless data rate: 867Mbps
Distance covered: Up to 10KM
Encryption: WPA/WPA2-PSK
Wi-Fi analysis: Inbuilt Wi-Fi channel analysis.
Standard: IEEE802.11ac/a
Frequency: 5.8GHz
WAN: 1 x 10/100/1000Mbps
LAN: 1 x 10/100/1000Mbps
Casing: Weatherproof Enclosure with IP65
POE Power: 24V Passive POE
Antenna: 15dBi Panel Antenna
RF Power: 500mW
Lightning Level: Common mode: 6KV; Differential mode +2kV
Flash/RAM: 16MB/128MB
PoE IN: 24V, 1A
DC IN: 12V, 1A
Restore factory default: 1x Reset Button/ Software based
Operating and Storage Temperature: -40°C to +70°C
Operating Humidity: 5%~95%RH Non-Condensing

https://www.commandonetworks.com/wireless/AIR-WB5G-10K-HG

Share this link via

Or copy link

COMMANDO Networks Whatsapp
COMMANDO Networks Telegram