COMMANDO AirPRO 300Mbps, 2x2 MIMO Omin Ant, Cloud Wall Access Point
COMMANDO AirPRO 300Mbps, 2x2 MIMO Omin Ant, Cloud Wall Access Point
COMMANDO AirPRO Series Wall Access Point, Cloud Based, Single Radio 2.4GHz 802.11ac, 300 Mbps, Built-in 2 Antennas, PA and LNA and built-in High-Gain Antenna, 8MB Flash, 64 MB RAM, PoE Support, 3 Working Mode, AP, WDS, AP-WDS Wireless AP
AIR-WAP300-PRO is 11n Standard Single Radio High Performance Wall Access Point, work on 2.4GHz with 300Mbps 11n (2.4GHz) Max data, it can access into more end users, supply more stable and faster Wi-Fi access in client density environments such as hotel, meeting room, shopping mall... Support Wireless AP, Gateway, Wi-Fi Repeater to meet with different installation requirement, Work with WLAN Controller, centralized configuration and management, easy to achieve Wi-Fi Coverage and maintenance, AIR-WAP300-PRO Can access into cloud server to do remote monitor and Captive Portal authentication for more business value, best choice for enterprise Wi-Fi application.
AIR-WAP-300-PRO compliant with 802.11n technology to provide up to 300Mbps data rate, 4 times faster wireless speed compared with 802.11b/g/n products. Then the NAT conversion rate is >93% s to achieve faster download and upload speed in a shorter time.
Centralized Management and Captive Portal Authentication SupportWork with WLAN Controller, centralized configuration and management, easy to achieve Wi-Fi Coverage and maintenance can access into cloud server to do remote monitor and Captive Portal authentication, to bring more business value.
Beamforming TechnologyAIR-WAP300-PRO support Beamforming technology, help its located device and focus Wi-Fi signal towards, creating more stable and efficient connections.
Smart Wi-Fi Channel AnalyzerImplanted Wi-Fi channel analyzer tool in each frequency, administrator use it to choose the channel with small amount wireless AP to avoid channel interference
RF Power Manual Adjustable, Flexible ApplicationWith powerful amplifier, improved the Wi-Fi range for some area with small quantity wireless AP; Can cut down RF power to suit for some high density wireless AP area to avoid Wi-Fi interference
Hardware | |
---|---|
Wireless | 2.4GHz 802.11n |
Interface | 1*10/100M Base-T RJ45 Port 1* Reset Button to restore factory default 1*DC Port |
Antenna | 2x2 MIMO High Gain Omni 3dBi Internal Antenna |
Power | DC 12V/1A;PoE: IEEE 802.3f, 48V |
Size | 86 x 86 x 34.5mm ( W x D x H) |
Data rate | 300Mbps |
Wi-Fi coverage | 25Meter |
Machine power consumption | <10W |
Firmware | |
Operation mode | AP/WDS/AP-WDS |
Network Protocol | IEEE 802.3(Ethernet) IEEE 802.3u(Fast Ethernet) IEEE 802.11ac |
Wireless Setting | Wireless Statistics based on SSID/AP/Client Wireless Isolation Between Clients SSID Multi SSID up to 4 Wireless Mac Address Filtering |
Wireless Security | WEP Encryption-64/128/152 bit WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP) High SSID |
System Setting | Web-based configuration (HTTP/Telnet) |
Firmware upgrade | Upgrade firmware via web browser or TFTP |
Administration Management | Admin User name/Password can be configured |
System monitoring | Device and Networking status statistic |
System Log | Support local log, host log, log file exporting |
Reset | Reset to factory defaults |
Backup | Backup device configuration, then restore this configuration if need |