COMMANDO Active PoE Injector fully complies with IEEE 802.3af/at/bt (15.4W, 30W, 90W) standard with backward compatibility. You can use the existing Non-PoE device to connect PoE/PoE+/Ultra PoE++ devices. The PoE Injector can work with all IEEE 802.3af/at/bt (PoE/PoE+/Ultra PoE++) compliant PDs (Powered Devices) or PoE/PoE+/Ultra PoE++ receiver Adapters or other equivalent products, to expand your network to where there are no power lines or outlets. It is designed for today’s mobile and IoT needs. These PoE Injectors are powerful and flexible enough for users to deploy PoE/PoE+/Ultra PoE++ standard supplies up to 90W of power per port ideal for applications using high power wireless access points, PTZ (Pan Tilt Zoom) IP cameras, Surveillance cameras, VoIP telephony systems, kiosks, POS terminals, thin client, 802.11ac and 802.11ax access points, small cells, and connected LED lighting devices .
COMMANDO Passive PoE injector is compact indoor, dual-port which provides DC power for PD devices. It is mostly compatible with AP's and other equipment supporting Passive PoE pinout (Pins 4/5 Power+ and Pins 7/8 Power-). An over current protection circuit is designed into the Passive PoE injector for added protection of PoE devices used with this injector.
It can be deployed in harsh environments, robust to deliver hassle free power to mission-critical devices. It Combines Electrical Power with a Gigabit Network Connection to Produce a Gigabit Power over Ethernet Signal. It expands network to areas with no Power Lines or Outlets are available with Plug and Play with no configuration required.
Auto-negotiation on each port senses the PD intelligently adjusts as per power requirement with optimal performance. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy installation, Plug-and-play installation with no configuration required.
Auto sensing PD /Auto 10/100 or 10/100/1000M ports with auto MDI / MDIX capabilities which also removes speed and duplex mismatches and automatically detects PD.
Backward PD compatibility saves equipment costs, and make this device future proof. It also allowing a single RJ-45 Ethernet cable to carry both power and data to each device with Giga Ethernet speed . This PoE solution frees network devices from the restrictions of power availability by removing the need for a local power source. This reduces cable clutter, eliminates the need for dedicated electrical outlets in inconvenient places, and cuts down the time required for deployment.
It provides Gigabit Ethernet speed with PoE/PoE+/Ultra PoE++ Injector. It is designed to be deployed in situations where high bandwidth is demanded.
It has dust proof enclosure protects the against harsh outdoor conditions with no Ingress of dust. It can withstand harsh environments, robust to deliver hassle free power.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides, most of the packaging material can be recycled and reused.
The power supply module can support IEE802.3at/af/bt power supply and a maximum port rate of 1,000 Mbit/s. The PoE power adapter module has two RJ45 network interface connectors. One RJ45 interface connects network device and the other is used to transmit network data and supply power to the Power Sourcing Equipment (PSE). It has protection against Short-circuit/over-load/over-current/over-voltage with Universal Input power 100 to 240VAC.
|AC Input Power||100-240V AC, 50-60Hz|
|AC input Power Adjusting range||90-264VAC, 47-63Hz|
|IEEE 802.3bt+ Type 4|
|PoE Pin assignments||Pin (4, 5+/7, 8-)|
|Output ripple||1% max|
|Combined load regulation||±3%|
|Combined line regulation||±5%|
|Operating temperature||-10 to 50°C|
|Operating humidity||10 to 95% non-condensing|
|Product Code||Interface Speed||Standard Supported||PoE support||Injector Type|
|CMD-POE-15.4W-AF||10/100/1000Mbps||IEEE 802.3af||Max 15.4W||Active|
|CMD-POE-30W-AT||10/100/1000Mbps||IEEE 802.3at||Max 30W||Active|
|CMD-POE-90W-BT||10/100/1000Mbps||IEEE 802.3bt||Max 90W||Active|
|CMD-POE-90W-BT-PFC||10/100/1000Mbps||IEEE 802.3bt Type 4||Max 90W||Active|
|CMD-FPOE-24V-0.5A||10/100Mbps||-||Max Power 24VDC @ 0.5A||Passive|
|CMD-FPOE-24V-1A||10/100Mbps||-||Max Power 24VDC @ 1A||Passive|
|CMD-FPOE-48V-0.5A||10/100Mbps||-||Max Power 48VDC @ 0.5A||Passive|
|CMD-POE-12V-1A||10/100/1000Mbps||-||Max Power 12VDC @ 1A||Passive|
|CMD-POE-24V-0.5A||10/100/1000Mbps||-||Max Power 24VDC @ 0.5A||Passive|
|CMD-POE-24V-1A||10/100/1000Mbps||-||Max Power 24VDC @ 1A||Passive|
|CMD-POE-48V-0.25A||10/100/1000Mbps||-||Max Power 48VDC @ 0.25A||Passive|
|CMD-POE-48V-0.5A||10/100/1000Mbps||-||Max Power 48VDC @ 0.5A||Passive|
|LED Indication||LED Status|
|AC Power not given to PoE Injector.|
|Green or Blue ON: AC Power provided.|
|Active||OFF: Not connected to PD.
Blue ON: PoE Power is given to PD.
All COMMANDO PoE injector are made available for use globally along with accessories in the bundle to facilitate for enhance operations.
The switch box comes included with the following accessories:
COMMANDO PoE injector come with One-year replacement warranty and lifetime support.
|Warranty and Support|
|Products covered||COMMANDO LightningPOWER PoE Injectors|
|Warranty duration||One Year RTB (Return To Base) replacement warranty.|
|Hardware replacement||COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request.|
|End-of-life policy||In case of discontinuation of the product, support is limited to 3 years from announcement date.|
|Effective date||Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO).|
|Support duration||Lifetime support.|
|COMMANDO Care||COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration.|
|Online Portal Access||Warranty allows guest access to commandonetworks.com for all available technical queries.|
Table 5 lists ordering information for the COMMANDO PoE injector To place an order, please contact your local reseller/distributor or COMMANDO Sales Representative at www.commandonetworks.com/ordering
|CMD-POE-15.4W-AF||COMMANDO LightningPOWER 10/100/1000Mbps IEEE 802.3af, Max 15.4W, Active PoE Injector|
|CMD-POE-30W-AT||COMMANDO LightningPOWER 10/100/1000Mbps IEEE 802.3at, Max 30W, Active PoE Injector|
|CMD-POE-90W-BT||COMMANDO LightningPOWER 10/100/1000Mbps IEEE 802.3bt, Ultra Ultra PoE++, No PFC, Max 90W, Active PoE Injector|
|CMD-FPOE-24V-0.5A||COMMANDO LightningPOWER 10/100Mbps, Max Power 24VDC @ 0.5A, PoE Injector|
|CMD-FPOE-24V-1A||COMMANDO LightningPOWER 10/100Mbps, Max Power 24VDC @ 1A, PoE Injector|
|CMD-FPOE-48V-0.5A||COMMANDO LightningPOWER 10/100Mbps, Max Power 48VDC @ 0.5A, PoE Injector|
|CMD-POE-12V-1A||COMMANDO LightningPOWER 10/100/1000Mbps, Max Power 12VDC @ 1A, PoE Injector|
|CMD-POE-24V-0.5A||COMMANDO LightningPOWER 10/100/1000Mbps, Max Power 24VDC @ 0.5A, PoE Injector|
|CMD-POE-24V-1A||COMMANDO LightningPOWER 10/100/1000Mbps, Max Power 24VDC @ 1A, PoE Injector|
|CMD-POE-48V-0.25A||COMMANDO LightningPOWER 10/100/1000Mbps, Max Power 48VDC @ 0.25A, PoE Injector|
|CMD-POE-48V-0.5A||COMMANDO LightningPOWER 10/100/1000Mbps, Max Power 48VDC @ 0.5A, PoE Injector|
|Release||New or Revision||Described in||Date|
|Release 1||First Release||First Release||January 4, 2021|