All Products

  • Switches
  • Routers
  • Wireless
  • Media Converters
  • Transceivers
  • PoE Injectors
  • Networking Accessories

Other Menu

  • Company
  • Partners
  • Quotation
  • Support

C3000-24P+4X+2Q

COMMANDO Marshall C3000 24GE + 4SFP+ + 2QSFP+ Uplinks, IP Base + IP Services, 530W PoE+, L3 Managed Core Switch

COMMANDO Marshall C3000, 24 10/100/100 Ethernet ports, 6 Combo ports 4 SFP+ 2 QSFP28 40Gbps Uplink, 30W PoE Per Port, 530W PoE+ Power Budget, 880Gbps Bandwidth, 654.72Mpps Packet Forwarding, 39K MAC, 4Mb Buffer, 9600b Jumbo Frames, 2GB DDR3 RAM, 8GB FLASH, IP Base + IP Services, L3 Managed Core Switch

C3000-24P+4X+2Q

COMMANDO Marshall C3000 24GE + 4SFP+ + 2QSFP+ Uplinks, IP Base + IP Services, 530W PoE+, L3 Managed Core Switch

COMMANDO Marshall C3000 L3 Managed Core Switch, Deliver High Performance, Flexibility, Fault Tolerance, and Advanced DUAL Software Features for Maximum Return on Investment, can act as Core, Distribution or Access Layer Switches, High port densities Gigabit Ethernet, SFP, 10G SFP+, 40G QSFP & 100G QSFP28, Security features, and Advanced Quality of Service (QoS), ideal for all Organizations considering reliable, affordable and simple CORE/Distribution/Access layer switching with CLI and WEB Managed, advanced PoE IEEE 802.3af Power over Ethernet (PoE) provides up to 15.4W per port, IEEE 802.3at Power over Ethernet Plus (PoE+) provides up to 30W per port, both IEEE 802.3at Layer 2 LLDP method and 802.3at 2-event classification methods are supported for compatibility with all PoE+ PD devices, scripting capabilities and Layer 3 routing, Automatic MDIX and Auto-negotiation on all ports select the right transmission modes (half or full duplex) as well as data transmission for crossover or straight-through cables dynamically for the admin, COMMANDO Switch can save up to 58% of power consumption, making it an eco-friendly solution for your business network

Rich L3 Features

Marshall C3000 L3 Managed Core Switch Series Delivers High-performance, Hardware Based Unicast routing, Static routes, RIPv1&v2, OSPF, BGP, ECMP, Routing policies, Policy-based routes (PBR), uRPF check & VRF, With Marshall C3000 Series, customers could easily achieve Policy based Route (PBR), More function of Routing available in Multicast routing such as IGMPv1/v2/v3, PIM-SM, PIM-SSM, PIM-DM, Static multicast & Mroute-RPF, IPv6 Unicast routing & IPv6 Multicast routing with Dual L3 IOS Image available in Marshall C3000 Managed Core Switch.

QoS

Marshall C3000 giving optimal performance to real-time applications such as voice and video, Traffic classification, Traffic behaviors, Queue scheduling, Congestion avoidance, Shaping & Device reliability, preserves network bandwidth and allows full control of network resources, Traffic classification based on the combination of the MAC address, IPv4/IPv6 Address, IP precedence and TCP/UDP port number, L2 protocol header, TCP, UDP, outgoing interface, and 802.1p field, With 8 queues per port, enable differentiated management of up to 8 traffic types.

Enhanced Security

IEEE 802.1X port-based access control and MAC-based access control ensure all users are authorized before being granted access to the network. Ingress/Egress Access Control Lists (ACL’s) can be used to restrict access to sensitive network resources by denying packets based on L2/L3/L4 headers Information, and for some services are based on time, the product can support time based ACL to match the requirement. System Security such as Hierarchical CLI protection to prevent unauthorized users from accessing Switch SSH v2.0, RADIUS and TACACS+ Authentication, ACL filtering (Standard ACL and extend ACL),DHCP Packet Filtering (Option 82), ARP Inspection, IP Source Guard, CPU Traffic Limit, Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood), BHM (Beat Heart Monitor).

Go Green with Your Ethernet

You now have the choice to go green when upgrading to a gigabit network! This new generation COMMANDO Gigabit Smart Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.

Power down Idle Ports

When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The COMMANDO can automatically detect the link status of each port and reduce the power consumption of ports that are idle.

Power Budget According to Cable Length

Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The COMMANDO analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.

Hardware
Model C3000-24P+4X+2Q
Port 24 10/100/1000M
4 SFP+ (10 Gbit/s SFP+)
2 QSFP+ (40 Gbit/s QSFP+)
PoE  530W
PoE Per Port 30W
Management port 1 Console
Reset KEY 1
Bandwidth 256Gbps
Packet Forwarding 190.46Mpps
MAC 64K
Buffer 3 Mbit
Jumbo Frames 9600 Bytes
DDR3 Ram 1Gbit
FLASH 2GB
Transmission Store and forward
Thunder Protection 6KV
Environmental Operating Temperature: 0℃ ~40℃ (32 ℉ ~104 ℉ ) 
Storage Temperature: -40℃ ~70℃ (-40 ℉ ~158 ℉ )
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing
Power in AC 100~240V 50/60hz
Fan Quantity Fan less
Dimensions ( W x D x H ) 232*152*45 mm
Certification CE, FCC
Ethernet Basic Features
Ethernet
Ethernet interface operating modes: full duplex, half duplex, and auto-negotiation/td>
Ethernet interface operating rates: 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s, 10 Gbit/s, and auto-negotiation
Flow control on (TX and RX direction)
Jumbo frames (9600 Bytes)
Link aggregation (Static/LACP)
Static/Dynamic Load balancing among the links of a Link aggregation
Interface isolation and forwarding restriction
Storm Control (unicast/broadcast/multicast)
VLAN
Vlan access modes: access, trunk, and QinQ
MAC based VLAN Classification
IP based VLAN Classification
Prococol based VLAN Classification
Default VLAN
Selective QinQ
VLAN mapping
Voice Vlan
Private VLAN
MAC
Automatic learning and aging of MAC addresses (Support HW learning)
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
Limitation on MAC address learning on interfaces (Port Security)
Limitation on MAC address learning on Vlans VLAN Security
Ethernet Loop Protection
MSTP
STP
RSTP
MSTP
BPDU filter, BPDU guard, Root guard
Partitioned STP and BPDU tunnel
ERPS
ERPS (Ethernet Ring Protection Switching)
Single ERPS ring, tangent ERPS rings, and intersecting ERPS rings
Hybrid networking of ERPS rings and other ring networks
G.8031&8032
G.8031 (Linear network protection)
G.8032 (Ring network protection)
Layer 2 multicast
Layer 2 multicast
IGMP snooping v1v2v3
IGMP proxy
Fast leave
MVR (Inter-VLAN multicast replication)
MLD Snooping v1/v2
IPv4 Forwarding
ARP
Static and dynamic ARP entries
Gratuitous ARP
Aging of ARP entries
ARP
ARP Proxy
Unicast routing
Static routes
RIPv1&v2
OSPF
BGP
ECMP
Routing policies
Policy-based routes (PBR)
uRPF check
VRF
Multicast routing
IGMPv1/v2/v3
PIM-SM
PIM-SSM
PIM-DM
Static multicast
Mroute-RPF
IPv6 Forwarding
IPv6 Basic ICMPv6, PMTU, ND (Neighbor Discovery)
IPv6 Unicast routing
IPv6 Static Route
RIPng
OSPFv3
V6 and V4 Transformation Tunnel, ISTAPTunnel, 6to4 Tunnel
IPv6 Multicast routing
MLD v1/v2
PIM-SM6
QoS
Traffic classification Traffic classification based on the combination of the MAC address, IPv4/IPv6 ddress, L2 protocol header, TCP, UDP, outgoing interface, and 802.1p field
Traffic behaviors
Access control after traffic classification
Traffic policing based on traffic classification (Policer)
Re-marking based on traffic classification (COS, DSCP)
Class-based packet queuing
Queue scheduling
SP (Strict Priority)
WDRR (Weighted Deficit Round Robin)
SP + WDRR
Congestion avoidance Tail Drop, WRED (Weighted Random Early Detection)
Shapping Shapping based on Interfaces and queues
Device Reliability
Smartlink
Smartlink
SmartLink multi-instance
MonitorLink
M-LAG Multi-Chassis Link Aggregation
VRRP VRRP (Virtual Router Redundancy Protocol)
STM
Switch Table Management Switch Table Management (Flexible system profiles)
Security
System Security
Hierarchical CLI protection to prevent unauthorized users from accessing Switch
SSH v2.0
RADIUS and TACACS+ authentication
ACL filtering (Standard ACL and extend ACL)
DHCP packet filtering (Option 82)
ARP Inspection
IP Source Guard
CPU Traffic Limit
Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood)
BHM (Beat Heart Monitor)
Port Security 802.1x port security
Configuration and Maintenance
Terminal service
Configurations through CLI (Command Line Interface)
Help information
Login through console and Telnet terminals
File system
File system
Directory and file management
Upload and download files through FTP or TFTP
IP Application
DHCP Server
DHCP Relay
DHCP Snooping
DHCP Client
DNS
NTP
Device Management
UDLD (Unidirectional Link Detection)
VCT (Virtual Cable Test)
LLDP
Debugging and Maintenance
Management of logs, alarms, and debugging information
User operation logs
Detailed debugging information for diagnosing network faults
Network test tools (Such as traceroute and ping)
Local and remote mirroring/multi-destination mirror
SmartConfig
Ethernet OAM
EFM (802.3ah)
CFM (802.1ag/Y.1731)
Network Management
Ping and traceroute (IPv4/IPv6)
SNMPv1/v2c/v3 (IPv4/IPv6)
Standard MIB
WEB UI
RMON
s-Flow
Version Upgrade
Online upgrade software image
Online upgrade of the BootROM

Related Products

C3000-24X+2C

COMMANDO Marshall C3000 24SFP+ + 2QSFP28 Uplinks, IP Base + IP Services, L3 Managed Core Fiber Switch

Read More
C3000-48P+4X+2Q

COMMANDO Marshall C3000 48GE + 4SFP+ + 2QSFP Uplinks, IP Base + IP Services, 800W PoE+, L3 Managed Core Switch

Read More
C3000-24P+4X+2Q

COMMANDO Marshall C3000 24GE + 4SFP+ + 2QSFP+ Uplinks, IP Base + IP Services, 530W PoE+, L3 Managed Core Switch

Read More
C3000-24P+8X

COMMANDO Marshall C3000 24GE + 8SFP+ Uplinks, IP Base + IP Services, 530W PoE+, L3 Managed Core Switch

Read More
C3000-48P+8X

COMMANDO Marshall C3000 48GE + 8SFP+ Uplinks, IP Base + IP Services, 800W PoE+, L3 Managed Core Switch

Read More
C3000-24SFP+4X+2Q

COMMANDO Marshall C3000 24SFP + 4SFP+ + 2QSFP+ Uplinks, IP Base + IP Services, L3 Managed Core Fiber Switch

Read More
C3000-24X+2Q

COMMANDO Marshall C3000 24SFP + 2QSFP+ Uplinks, IP Base + IP Services, L3 Managed Core Fiber Switch

Read More
C3000-48SFP+4X+2Q

COMMANDO Marshall C3000 48SFP + 4SFP+ + 2QSFP Uplinks, IP Base + IP Services, L3 Managed Core Fiber Switch

Read More

Awards

Certificate

Download 'COMMANDO Networks' Mobile App Available on App Store and Google Play

Whether you are browsing the web or on the go, you can easily add content to your queue with our mobile apps. Save time and get more done by working from anywhere.