COMMANDO Scout C1000 Series Unmanaged Switches consists of high power PoE/PoE+/Ultra PoE++ switches that complies IEEEE 802.3af/at/bt and supplies 15.4W / 30W / 90W of power per port and ideal for applications using high power Wireless Access Points, PTZ (Pan Tilt Zoom) IP Cameras, Surveillance Cameras, VoIP Telephony systems, Kiosks, POS Terminals, Thin client, 802.11ac and 802.11ax Access Points, small cells, and connected LED lighting, which is useful for small to medium-sized businesses, Internet cafes, hotels, schools, and others. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as PoE/PoE+/Ultra PoE++ with power budget up to 800W capability while reducing energy consumption and minimizing noise. This series switches are available in 4 to 48 Gigabit Ethernet ports or 4 to 48 SFP Ports with 2/4 modular copper/Fiber Uplinks. Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations.
It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity. This Switch also removes speed and duplex mismatches automatically as well as covers larger physical distance ( Up to 250m) with copper.
It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+/Ultra PoE++ power output for transmissions based on the cable length for PoE/PoE+/Ultra PoE++ devices connected.
It provides compact design that provides additional deployment flexibility, fiber connectivity combo options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch. Convenient Deployment as modular power design allows customers to use either AC or DC power sources according to where the switch is deployed. When inserting two power modules, both power modules share the load and help to extend the lifetime of the Switch.
It is having fanless or 2/3 fan models . These switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.
It can be quickly set up with plug and play with Zero Touch Provisioning . It is designed for Small business network these unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+/Ultra PoE++ reliable performance at a very affordable cost for wireless devices. These switches are powerful and flexible enough for users to deploy wireless access points, surveillance cameras, IP phones and other PoE/PoE+/Ultra PoE++ supported devices over longer distance up to 250m over copper pairs. This switch Giga Ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables.
It easy to use and manage and Plug-and-Play that requires no configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. The switches range from 4 to 48 Gigabit Ethernet PoE/PoE+/Ultra PoE++ models as well as non-PoE models along with flexible 2 or 4 of Giga Ethernet copper-based or Fiber Ports Uplinks. This series also has 4 to 48 Fiber SFP Ports models. It contains 4 to 48 Gigabit Ethernet PoE/PoE+/Ultra PoE++ models have up to 30W (PoE/PoE+) or 90W Ultra PoE++ Per Port power budget and this series switches has total power budget range from 290W, 600W and 800W to meet PoE/PoE+/Ultra PoE++. Its compact size makes it ideal for rackmount/wall-mount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.
SCOUT C1000 Series Switches are higher power switches that support 290W up to 800W (PoE/PoE+/Ultra PoE++) Power Budget. This series switches smartly adjust IEEE802.3af / IEEE802.3at /IEEE802.3bt PoE/PoE+/Ultra PoE++ (30W or 90W per port). All ports are capable of PoE/PoE+/Ultra PoE++ and allows Power-over-Ethernet PoE /PoE+/Ultra PoE++ to connect and power PoE/PoE+/Ultra PoE++ capable surveillance cameras, Wireless access points, VoIP phones, IoT devices and all PoE/PoE+/Ultra PoE++ capable devices using just Ethernet cabling.
COMMANDO BT series Switches with PoE+/Ultra PoE++ standard supplies up to 90W of power per port ideal for applications using high power wireless access points, PTZ (Pan Tilt Zoom) IP cameras, Surveillance cameras, VoIP telephony systems, kiosks, POS terminals, thin client, 802.11ac and 802.11ax access points, small cells, and connected LED lighting, which is useful for small to medium-sized businesses, Internet cafes, hotels, schools, and others. They are easy to install and maintain and provide PoE+/Ultra PoE++ power to high power demanding devices , helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as built-in PoE+/Ultra PoE++ IEEE 802.3at/IEEE802.3bt type-4 (90W) while reducing energy consumption and minimizing noise with built-in PoE+/Ultra PoE++ IEEE 802.3at/IEEE802.3bt type-4 (90W) with circuit protection preventing power interference between ports. In a nutshell, 90W PoE++ means affordable power for more power-hungry devices, more business and future ready.
Auto sensing/Auto PoE/PoE+/Ultra PoE++ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.
COMMANDO Scout C1000 Series Unmanaged Switches comes with fanless or 2/3 Fans with Small form-factor, compact PoE/PoE+/Ultra PoE++ switch operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments. Fan based Switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise. The Fan based switches also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.
It uses energy-efficient ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides, most of the packaging material can be recycled and reused.
It Provides additional deployment flexibility, fiber connectivity combo options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.
It has AC as well as DC input power protect from power surges through their inline power supply automatically and have in build Surge protection of ±6KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them. Convenient Deployment as modular power design allows customers to use either AC or DC power sources according to where the switch is deployed. When inserting two power modules, both power modules share the load and help to extend the lifetime of the Switch.
State of art quality product that can serve on real time high-speed Performance with AC or DC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards , durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.
COMMANDO Scout C1000 Series Unmanaged Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at/bt. Supported Auto-MDIX function automatically identifies straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
Supports wide range of IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, IEEE802.3af, Power over Ethernet, IEEE802.3at, Power over Ethernet plus and IEEE802.3bt, Power over Ethernet plus plus.
COMMANDO Scout C1000 Series Unmanaged Switches hardware supports L2 VLAN function with IVL, SVL, and IVL/SVL with 2-hash algorithm selection for L2 table searching/learning along with Aging timer range from 0.2s to 1600000s. IEEE 802.1Q VLAN with 4K-entry VLAN Table with limited learned L2 MAC entry on each port and each VLAN. Supports up to 64 spanning tree instances for MSTP (IEEE 802.1s), RSTP, and STP. 8K-entry L2 MAC table with 4-way hashing algorithm. Independent 512-entry L2/IP Multicast table for multicast function. Supports Reserved Multicast Addresses processing.
It also has per-port L2 storm filtering control mechanism which suppresses the flow rate of some specific packets for Unknown Unicast Storm, Unicast Storm, Unknown Multicast Storm, Multicast Storm, and Broadcast Storm. IEEE 802.3az Energy Efficient Ethernet (EEE) for 100Base-TX in full duplex operation and supports 10Base-Te for 10Base-T in full/half duplex. The Energy Efficient Ethernet (EEE) operational mode combines the IEEE 802.3 Media Access Control (MAC) Sub-layer with a family of Physical Layers defined to support operation in Low Power Idle (LPI) Mode. When Low Power Idle Mode is enabled, systems on both sides of the link can disable portions of the functionality and save power during periods of low link utilization. EEE operational mode supports IEEE 802.3 MAC operation at 100Mbps. For 100Mbps operation, the 100Base-TX PHY is supported interoperable with legacy 10Base-T PHYs over 100m of Class-D (Category 5) or better cabling.
It supports IEEE 802.3x full duplex flow control. If one port’s received frame buffer is over the pause threshold, a pause-on frame is sent to indicate to the link partner to stop the transmission. When the port’s received frame buffer drops below the pause threshold, it sends a pause-off frame.
It has Auto MDI/MDI-X, to adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports. Loop protection, If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms. SFP fiber uplinks provides greater distance connectivity using Gigabit fiber uplinks. The switch provides an estimated cumulative energy savings due to green Ethernet features being auto enabled along with power budget up to 800W. It Supports broadcast, multicast, unknown- multicast, and unknown-unicast packet suppression control, IEEE 802.1x, IEEE 802.3az Energy Efficient Ethernet (EEE).
Ultra PoE++ offers a robust, end-to-end high power PoE solution with up-front cost savings. Fortunately, transitioning to the new standard won’t necessarily be a costly affair for users and installers or network seeking to deliver more power to, standard CAT 5 and 6 Ethernet cables are IEEE compatible So, you can add and move devices by moving these cables. Wiring and equipment costs remain down as there’s usually no need to move AC sources physically. Safety measures ensure up to 90W of power is safely delivered. Ultra PoE++, satisfies this hunger by extending the PoE and PoE+ specifications to 90W of PD delivered power. Ultra PoE++ capabilities of this standard expand the field of Ethernet-powered applications by several orders of magnitude, enabling entirely new classes of PDs, such as power-hungry picocells, base stations or heaters for pan-tilt-zoom cameras and these critical devices stay up during load shed. New IEEE 802.3bt Standard Boosts the Technology for IoT Applications. The first and the most important improvement in the 802.3bt standard is the capability to transfer much more power to edge devices (powered devices or PDs) - 71.3 W, while sending 90 W from the power sourcing equipment (PSE) side enable in numerous new IoT and especially IIoT (Industrial IoT) power hungry and high-speed devices to be powered by PoE technology.
|C1000 Switch Parameter||Specification|
|Packet Buffer Memory||4.1 MB|
|Switching Method||Store and Forward|
|Switching Capacity||7.2 Gbps to 104 Gbps|
|Jumbo frame Size( Bytes)||10000|
|Maximum packet length(Bytes)||10000|
|Operation Temperature||0° to 55°C|
|Storage Temperature||-20° to 70°C|
|10% to 90%|
|Storage humidity(relative, noncondensing)||5% to 90%|
|Input Power Supply|
|Surge protection (kV)||±6 kV|
|Fan (Number)||Fanless as well as Up to 2 or 3 Fans|
IEEE 802.3X Flow Control Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. IEEE 802.3 af/at/bt Power over Ethernet (PoE/PoE+/Ultra PoE++) Provides up to 30 W or 90W per port having power budget up to 800W, which allows support of the latest PoE/PoE+/Ultra PoE++ capable devices such as Video IP phones, wireless access points, and advanced pan/tilt/zoom security cameras, as well as any PoE/PoE+/Ultra PoE++ compliant end device. This ensures that cost of additional electrical cabling and circuits reduced to zero. PoE/PoE+/Ultra PoE++ availability on all ports. Auto-PoE/PoE+/Ultra PoE++ power configuration means switch automatically assigns the required power to a port for a PD device up to 250m copper cables.
The switching capacity indicates the total data exchange capability of the switch, in Gbps. MTBF is a basic measure of a system's reliability. This series Switch is having higher MTBF, means very reliable product.
This series switches Provides a quick, safe and cost-effective IEEE 802.3af/ IEEE 802.3at/IEEE 802.3bt PoE/PoE+/Ultra PoE++ Network solution for small businesses and enterprise. It has total power budget of up to 290~800 watts for different kinds of PoE/PoE+/Ultra PoE++ devices over a long-range copper cable length up to 250m, provides power and network connectivity for PoE/PoE+/Ultra PoE++ powered devices over a single network cable. PoE/PoE+/Ultra PoE++ devices range from wireless access points, IP cameras, VoIP phones, PoE LED lighting, PoE speakers to IoT doorbells and other IoT, wireless access points, Wireless bridges or other standards compliant PoE/PoE+/Ultra PoE++ all end devices. All ports auto-sensing detects 802.3af/at/bt devices so they automatically receive PoE/PoE+/Ultra PoE++ power.
|LED Indication on Switch||LED Status|
|Power||Green OFF: No power on the switch., Green ON: The switch powered on|
|Link/Act||LINK/ACT bi-color LED:, OFF: Port disconnected or link fail., Green ON: 1000Mbps connected., Amber ON: 10/100Mbps connected., Green Flashing: 1000Mbps connected and Data in transit, Amber Flashing: 10/100Mbps connected and Data in transit|
|System||Green OFF: The system is starting, please wait, Green ON: The system is up and running|
|PoE||OFF: PoE/PoE+/Ultra PoE++ power is not provided on port, Blue ON: PoE/PoE+/Ultra PoE++ power is provided on port|
|PoE MAX||PoE MAX OFF: PoE Power budget is available in switch, Red ON: PoE Power budget is 95%|
Ideally, shorter cables would use less power because of less power degradation over their length. This is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 100 meters in length. These switches analyze the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.
|Connection Cable Type||Category and Speed||Maximum Cable Distance Supported|
|Unshielded Twisted Pair cable||10/100Base-TX:UTP category 5/5e/6 cables ( Maximum 100m), 1000Base-T:UTP Category 5/5e/6 cable ( Maximum 100m )||100M|
|Shielded Twisted Pair cable||10/100Base-TX:STP category 5/5e/6 cables ( Maximum 250m), 1000Base-T:UTP Category 5/5e/6 cable ( Maximum 100m )||100M|
|Optical Fiber Cable||550M~120KM Depending on SFP||120KM|
All Soldier C1000 Series Switches are made available for use globally along with accessories in the bundle to facilitate for enhance operations.
The switch box comes included with the following accessories:
|Warranty and Support|
|Products covered||COMMANDO Soldier C1000 Series Unmanaged Switches|
|Warranty duration||One Year RTB (Return To Base) replacement warranty – optionally extendable up to 5 years.|
|End-of-life policy||In case of discontinuation of the product, support is limited to 3 years from announcement date.|
|Effective date||Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO).|
|Support duration||Lifetime support.|
|COMMANDO Care||COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration.|
|Online Portal Access||Warranty allows guest access to commandonetworks.com for all available technical queries.|