Compare Models

COMMANDO AirONE Wireless Series
Gallery YouTube

COMMANDO AirONE Wireless Series

Super Wds mode where bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. All bridges act as master and slave simultaneously. With this Super WDS meshing of bridges makes network failure rate to zero. It enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 18/15/11 dBi Internal Antenna as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the CPE and base station. It provides low latency, high throughput in PTP/PTMP/MTMP application likes IP camera, long range Wi-Fi Transmission) with Beamforming Technology.

It has separate Gigabit 1 WAN & 1 LAN port IP65 Waterproof and Dust proof Enclosure casing. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the back-end the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment.

1
AIR-AP1200 -- COMMANDO AirONE 1200Mbps, 2.4GHz+5GHz 802.11ac, Indoor Access Point
19 Sep 2023
2
AIR-AP750 -- COMMANDO AirONE 750Mbps, 2.4GHz+5GHz 802.11ac, Indoor Access Point
19 Sep 2023
3
AIR-AP300 -- COMMANDO AirONE 300Mbps, 2.4GHz, 802.11n, MIMO, Indoor Access Point
19 Sep 2023
4
How to Install and Configure Wireless Bridge - COMMANDO AirONE AIR-WB-1K / AIR-CPE1K+, 802.11n
03 Feb 2023
5
How to Install and Configure Wireless Bridge - COMMANDO AirONE AIR-WB5G-10K / AIR-CPE10K+, 900Mbps
03 Feb 2023
6
How to Install and Configure Wireless Bridge - COMMANDO AirONE AIR-CPE10K+ / AIR-WB5G-10K, 900Mbps
01 Feb 2023
7
How to Install and Configure Ceiling Wireless Access Point - COMMANDO AirONE AIR-AP750 750M 802.11ac
01 Feb 2023
8
How to Install and Configure Outdoor Access Point - COMMANDO AirONE AIR-APO1200, 1200Mbps, 802.11ac
30 Jan 2023
9
How to Install and Configure Ceiling Wireless Access Point - COMMANDO AirONE AIR-AP300, 802.11n
23 Jan 2023
10
How to Install and Configure Wi-Fi 6 Wireless Access Point - COMMANDO AirONE AIR-AP1800AX 1800Mbps
16 Jan 2023
AIR-AP1800AX-V1

COMMANDO AirONE 1800Mbps, 2.4GHz+5GHz, 802.11ax/ac/b/g/n, Wave 2.0, Wi-Fi 6 Access Point


Highlights

Operation Modes: AP, Gateway Modes
Wireless data rate: 1800Mbps
Distance covered: 91+ Meters
Users Supported: Access end users 256 max, concurrent end users 120+
Technology Supported: Wave 2.0
Max. SSID: 8
Encryption: WPA/WPA2PSK_TKIPAES
Standard: IEEE 802.11ax/ac/b/g/n
Wi-Fi analysis: Inbuilt Wi-Fi channel analysis.
Frequency Band: 2.4GHz+5GHz
WAN: 1x 10/100/1000Mbps WAN
LAN: 1x 10/100/1000Mbps LAN
DC: 12V, 2A
PoE Power: WAN Port 48V, 802.3at POE+
AP: Standalone
Flash: SPI NOR 32MB
RAM: 256MB
Antenna & RF Power: Build in 3dBi MIMO Antenna, 300mW
Dimensions: 168mmX168mmX32mm
Restore factory default: 1x Reset Button/ Software based
Operating and Storage Temperature: -40°C to +70°C
Operating Humidity: 5%~95%RH Non-Condensing

https://www.commandonetworks.com/wireless/AIR-AP1800AX-V1

Share this link via

Or copy link